Feature
●WHAT YOU GET-The package includes solder seal wire connectors White AWG 26-24(60PCS),Red AWG 22-18(70PCS),Green AWG 18-16(50PCS),Blue AWG 16-14(50PCS),Yellow Connectors AWG 12-10(20PCS).
●Easy to Use-The solder connector no need to crimp, just heat then complete. An easy one step connection of wires, soldered, insulated and sealed.
●WATERPROOF WIRE CONNECTOR-The Heat shrink wire connector designed for Dual-walled,Polyolefin tubing outside provides insulation and improves pullout strength. There are two hot melt waterproof adhesive rings in each butt terminal,which help it hold up better to moisture.
●EASY IDENTIFICATION-Number-coded tubing makes it easy to identify the right size butt connector.
●WIDE APPLICATION-The waterproof solder wire connectors Shrinking ratio:2:1.Used for Automotive,Boat,Marine and other Outdoor Applications.
[320PCS]
[250PCS]
[330PCS]
[420PCS]
Description
OURU 250PCS Heat Shrink Solder Butt Connectors
Specifications:
60 x White Connectors: Diameter 1.7 mm, Cable cross-section 0.25-0.34 mm² (A.W.G.:26-24)
70 x Red Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm² (A.W.G.:22-18)
50 x Green Connectors: Diameter 4.5mm, Cable cross-section 0.75-1.25 mm² (A.W.G.:18-16)
50 x Blue Connectors: Diameter 4.5mm, Cable cross-section 1.5-2.5 mm² (A.W.G.:16-14)
20 x Yellow Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm² (A.W.G.:12-10)
Feature:
Waterproof Seal-Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot
Melt Adhesive & Solder inside, sealed with Advanced Waterproof Function
Fast & Easy Operation-Just strip your wires, insert them into the connector and apply heat.
Transparent sleeve provides precise inspection, easy control soldering process
No Slip Wire Contact-Tubing reduces in size and solder will melt and flow through the stripped
wires, ensure strong holding, avoids wires slipping out from the terminal
Instructions for use:
Insert the wires into the solder sleeve.
Apply heat to the soldering while swinging the hot air gun mildly.
Heat close at the highest setting (used a 1500w heat gun)until you see the solder shine then stop.Job done.
Great wiring solution for hard to reach or limited space areas. Since no crimping is required for
these solder wire connectors, you can easily use them in hard to reach or limited space
environments. Simply position the stripped wires into the solder sleeve and apply heat to
finish the connection. Make properly soldered and waterproof connections in less than 30 seconds.