XUNHON Portable Bill Counter X01-Doesnt Count Value of Bills
![2](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Error Code Display
Most of the errors may be caused by dust or dirt on the inside of the machine. Keeping the machine clean is the most important thing.(Error Code E01,E02,E03,E04,E05 on the display mean that you should clean or replace sensor.)
EE1: Suspect bill detected without UV
EE2: Suspect bill detected without MG
EE4: A half bill is counted &The counting sensor is dirty or broken
EE5: The last counted bill is a double note
EE7: Slanting bill is detected
EE9: The bill width size is larger than 75mm
EEA: Chain bill is detected
BF: Wheels are running without bills
The way to adjust the up/down screw
After long use and long transportation, the screw might be loose. Now it is necessary to turn the screw clockwise to increase the friction. If the screw is too loose, two bills will be counted one time. If the screw is too tight, the banknote will be stuck.
Note: X01 Money Counter detects only American currency and count all the things as long as its size within 110-180mm(L), 50-85mm(W), 0.075mm-0.15mm(Thickness). It counts number of bills, but not bill denomination.