[18-Sheet Cross Cut]
This is a modal window.
High-quality steel cutter, with superior hardness level and extraordinary wear resistance
Thanks to the powerful steel cutter, this paper shredder could paper with staples successfully
As a super micro cut shredder, Bonsen ShredPro-Model S3106 cuts paper into 2x12mm pieces
S3106 | Model# | S3110 |
Super Micro Cut | Shred Type | Micro cut |
P-5 | Security Level | P-4 |
5/64"-15/32" | Shred Size | 5/32"-15/32" |
40 minutes | Run Time | 30 minutes |
5.3 Gals /Pullout | Bin Capacity/Type | 6 Gals/Pullout |
≤50dB | Noise Level | ≤62dB |
S3106 | Model# | S3107 |
Super Micro Cut | Shred Type | Super Micro Cut |
P-5 | Security Level | P-5 |
5/64"-15/32" | Shred Size | 5/64"-15/32" |
40 minutes | Run Time | 30 minutes |
5.3 Gals /Pullout | Bin Capacity/Type | 6.6 Gals/Pullout |
≤50dB | Noise Level | ≤58dB |
S3106 | Model# | S3105 |
Super Micro Cut | Shred Type | Cross Cut |
P-5 | Security Level | P-4 |
5/64"-15/32" | Shred Size | 5/32 x 1-12/32 |
40 minutes | Run Time | 40 minutes |
5.3 Gals /Pullout | Bin Capacity/Type | 9 Gals/Pullout |
≤50dB | Noise Level | ≤55dB |
S3106 | Model# | S3104 |
Super Micro Cut | Shred Type | Cross Cut |
P-5 | Security Level | P-4 |
5/64"-15/32" | Shred Size | 5/32X1-12/32 |
40 minutes | Run Time | 30 minutes |
5.3 Gals /Pullout | Bin Capacity/Type | 6.6 Gals/Pullout |
≤50dB | Noise Level | ≤52dB |
How often should I lubricate the document shredder?
In order to prolong the service life of the paper shredder, please use a professional paper shredder lubricating sheet or oil to lubricate the machine once or twice a month.
The machine stops working and the overheating red light is on. What should I do?
Just turn it off and let it cool for about 20 minutes, then the shredder will work again.
The micro-cut shredder is jammed. What should I do?
Generally, you can press the "REV" button and pull up the paper at the same time. If there is a serious paper jam, you can press the "FWD" and "REV" buttons several times to clean the cutter, and then use tweezers and other tools to pick up the jam.
Why is the number of sheets that can be shredded lower than the maximum number of sheets described?
Please check if the paper is damp, contains plastic or too thick. If so, please let the paper dry before shredding, or remove the plastic part, or reduce shredding sheets per pass. No more than 10 sheets please.
Why are there paper scraps in the bin or in the cutter when I receive the new paper shredder? Is it a used machine?
Please be assured that all paper shredders purchased from us directly are brand new. In order to ensure the quality and function of the shredder, we 100% tested every machine in production, and some units might not be cleaned completely.
About Us
Always changing shredders because of paper jams, machine not working and worry protection level?
BONSEN always provides higher-performance paper shredder with stylish design and sturdy structure, ultra-low noise, non-stop shredding for you.
Over 200 appliance and appliance part patents
Experienced R&D team in this field for over 20 years
The stylish appearance of the Italian designer team
Hassle-free replace/return
Customer team is always there for you