Feature(may vary by option.)
●Workable for all popular powder fastening systems and single pin Concrete Nailers.
●Ballistic point and smooth shank makes the penetrating easier and lower defect rate.
●Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel. Plated surface makes the pins durable and suitable for treated lumber.
●Pins measure 1-3". With a .300” Head diameter, .145” Shank diameter and .315” diameter flute.
●1" Diameter Washer increases bearing surface against the material to be fastened. Particularly used for fastening wood to concrete, wood to steel, steel to concrete and steel to steel. 100pcs per pack.
[1-1 & 4 ]
[1-1 & 2 ]
[1 ]
[2 ]
[2-1 & 2 ]
[3 ]
Description
Applications
Fastening Wood to Concrete
When fastening into concrete always maintain a minimum 3" spacing between fastenings and 3" from any free edge. Penetration into concrete should always be 1" minimum. The concrete thickness should be at least 3 times the penetration depth.
Fastening Wood to Steel
When fastening into steel always maintain a minimum 1-1/2" spacing between fasten ings and 1/2" from any free edge. Fastener length should be long enough to penetrate the steel completely for maximum holding power. Steel thickness is limited to 3/16" to 5/16".
Thin Gauge Metal to Concrete or Masonry Walls
When fastening into concrete always maintain a minimum 3" spacing between fastenings and 3" from any free edge. Penetration into concrete should always be 1" Min. The concrete thickness should be at least 3 times the penetration depth.
When fastening into masonry, shoot into horizontal joints only.
Fastening Steel to Steel
When fastening into steel always maintain a minimum 1-1/2" spacing between fasten ings and 1/2" from any free edge. Fastener length should be long enough to penetrate the steel completely for maximum holding power. Steel thickness is limited to 3/16" to 5/16".
FVSCM POWDER ACTUATED FASTENERS FAMILY-WASHERED PINS
 1" Washered Drive Pin |  1-1/4" Washered Drive Pin |  1-1/2" Washered Drive Pin |  2" Washered Drive Pin |  2-1/2" Washered Drive Pin |  3" Washered Drive Pin | |
|
Customer Reviews
| 51
| 51
| 51
| 51
| 51
| 51
|
|
Price
| $12.99 | $17.27 | $15.95 | $19.99 | $20.15 | $18.47 |
|
Shank Length
| 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" |
|
Washer
| 1" | 1" | 1" | 1" | 1" | 1" |
|
Package
| 100 | 100 | 100 | 100 | 100 | 100 |
|
Powder Fastening system
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
|
Power Framing Nailers
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
FVSCM POWDER ACTUATED FASTENERS FAMILY-DRIVE PINS
 2-1/2" Drive Pin |  3/4" Drive Pin |  1" Drive Pin |  1-1/4" Drive Pin |  1-1/2" Drive Pin |  2" Drive Pin |  3" Drive Pin | |
|
Customer Reviews
| 49
|
— | 49
| 49
| 49
| 49
| 49
|
|
Price
| $14.99 | $9.49 | $6.99 | $10.99 | $11.51 | $11.75 | $15.35 |
|
Shank Length
| 2-1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 3" |
|
Washered
| ✘ | ✘ | ✘ | ✘ | ✘ | ✘ | ✘ |
|
Package
| 100 | 100 | 100 | 100 | 100 | 100 | 100 |
|
Powder Fastening system
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
|
Power Framing Nailers
| ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
FVSCM POWDER ACTUATED FASTENERS FAMILY-1-1/4"
 1-1/4" with 90°Angle Clip |  1-1/4" with 45°Angle Clip |  3/4" with Top Hat |  3/4" with Washer | |
|
Customer Reviews
|
— | 1
|
— |
— |
|
Price
| $34.99 | $29.99 | $10.99 | $14.99 |
|
Shank Length
| 1-1/4" | 1-1/4" | 3/4" | 3/4" |
|
Accessory
| 90° Ceiling Angle Clip | 45° Ceiling Angle Clip | Top Hat | 3/4" Washer |
|
Package
| 100 | 100 | 100 | 100 |
|
Powder Fastening system
| ✔ | ✔ | ✔ | ✔ |
|
Power Framing Nailers
| ✔ | ✔ | ✔ | ✔ |
