Feature
●【APPLICABLE】The 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It is also suitable for low viscosity fluids such as water.
●【FEATURE】 Portable fluid extractor empties in 16 pumps or less No power source needed. By manpower to push and have vacuum pressure Warm or cold fluid extraction
●【FEATURE】 Includes extraction tube kit Muti-size hose: change different sizes for different condition Storage more, improve work efficiency
●【INCLUDING】 1 X 7L Oil Extractor 1 X Φ10mm Nylon Hose 1 X Φ8mm Nylon Hose 1 X Φ6mm Nylon Hose 1 X Φ4mm Nylon Hose 1 X Instruction Manual
●All products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
Description
Operation Instructions
Oil Extraction
- Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
- Remove the vehicles oil dipstick.
- Connect the main suction tube to both the pump inlet and probe.
- Raise the handle to its highest limit and pump it fully several timea to create a vacuum which will automatically begin to extract the oil/fluid. Observe the oil/fluid as it rises up the chamber and stop pumping when the fluid is 6"(150mm) from the top. The unit will continue to fill and will automatically shut off when the internal pump after the unit has shut off this way result in liquid entering the inner pump chamber. If this should occur refer to section 7 on how to expel fluid from the pump.
- Once completed, remove the main suction tube from the pump, pour the oil/fluid into a suitable container and dispose of it in accordance with local authority regulations. DO NOT over tip the extractor when emptying it as this may cause fluid to enter the inner pump chamber. Before using the pump again press the vacuum release valve for 5 seconds to release the vacuum within the pump. This valve is situated on the top of the unit underneath the handle.
- In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows. Firstly press the vacuum release valve for 5 seconds to release the vacuum within the pump. Seal off the fluid entry/pouring hole by placing your hand over it. Then pump the handle up and down several times. Any fluid that had entered the pump will be expelled from the air valve on the underside of the unit.
Other Fluids
- Select and insert the appropriate diameter probe into the fluid to be drained.
- Connect the main tube to both the pump inset and the probe.
- The operation of the extractor is the same as described above.
Product Details
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|
| DASBET 9L Fluid Extractor Manual Oil Changer | DASBET Pneumatic Brake Fluid Bleeder Tool | DASBET 12V 60W Oil Change Pump Extractor | DASBET 12V 60W Oil Change Pump Extractor | |
| Package Content | 1 X 9L Oil Extractor; 1 X Φ10mm Nylon Hose; 1 X Φ8mm Nylon Hose; 1 X Φ6mm Nylon Hose; 1 X Φ4mm Nylon Hose; 1 X Φ4mm Brass Probe; 1 X Instruction Manual | 1 x Hose; 2 x Brake Fluid Change Tool; 2 x Metal Adapters; 4 x Plastic Adapter | 1 x Fuel Delivery Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clips | 1 x Fuel Delivery Pump; 1 x Outlet Hose; 1 x Inlet Hose; 2 x Hose Clamps; 2 x Battery Clips |
| Application | Ideal for removing engine oil, gear oil, coolant fluid, power steering fluid, brake fluid, etc. and also for other liquids such as water and soluble oil, suitable for most vehicles and machines | Fit for most vehicle | Widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil | Widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, Power generation machinery, tractors, lawn mowers and various machinery to change the oil |