Feature

●Open End Dome Head Countersunk Pop Rivets - 120 Degree Countersink
●Lightweight, Sturdy & Durable Aluminum Alloy
●#6 (3/16 inch) Diameter
●Drill (Hole) Size: #11 Bit, 3/16" Hole (0.192 - 0.196)
●Excellent Corrosion & Rust Resistance

[1000 6-4C | 3 & 16 x 1 & 4 Grip (0.188-0.250)]

Description

Aluminum Pop Rivets - Countersunk, Flat Head

All Aluminum Flat Rivets

3/16" (or #6) Rivet Diameter
Commonly referred to as flat rivets
Installed into countersunk holes for a flush surface (120 degree countersink)
Used to fasten two materials together quickly, and efficiently
Commonly used when there is no access to the blind side of the two materials
Commonly used in tracks, pulleys, and rollers
Aluminum hat and mandrel - Lightweight, Strong, Durable and Non-Magnetic

Like all Blind Rivets, Flat Rivets are used to connect two pieces of material quickly and efficiently. The hat of a countersunk rivet is almost inverted, with a 120 degree countersink in the integrated washer. A countersunk rivet is used in countersunk holes and once set is flush to the surface. They are used in tracks where the head will not protrude into sliding tracks or rollers.

Flat rivets have standard open ends. They are tubular, comprised of a hat and mandrel. When installed, the length of the mandrel is snapped off. Both the hat and mandrel are made of the same material.

Product Specifications:

Fastener Type: Blind Rivet
Material: Aluminum
Rivet Diameter: (#6) 3/16" (.187)
Drill Bit Size: #11
Flange Diameter: 0.344"
Mandrel Diameter: 0.114"
Head Style: Countersunk / Flat
Head Height Max: 0.05
Countersink: 120 Degrees

Countersunk Blind Rivets - Aluminum


Aluminum Hat and Mandrel Blind rivets in this selection are made entirely out of aluminum, meaning that both the hat and mandrel are aluminum alloy. Aluminum fasteners are prized for their high strength-to-weight ratio, providing a durable fastener without adding much weight. Aluminum rivets are also non magnetic and corrosion resistant. Aluminum rivets are commonly used in automotive, aerospace and machinery applications where overall weight is a concern.	Blind Rivets Blind rivets (commonly called pop rivets) get their name because of their function. Blind rivets are commonly used in applications where a bolt and nut will not work because there is only access to one side of the materials being fastened. During installation, the mandrel is pulled through the body of the rivet and snaps off after the grip has been reached.	Countersunk / Flat Head Countersunk rivets are different from standard pop rivets due to the 120 degree tapered, countersunk design. This leaves behind a flat head that runs flush with the installation surface, as opposed to a standard pop rivet which leaves behind a domed head that protrudes above the surface. Because of this they are commonly used in tracks, sliding rollers, pulleys and applications where a flush surface is key.

Countersunk Blind Rivets - Aluminum

Aluminum Hat and Mandrel

Blind Rivets

Countersunk / Flat Head