Product Description:
The DY368 grain mill is a sturdy mill with an aluminum hopper that can hold up to 4kg of grains at one time, and its easy to build your own hopper extension if you need to fit more than this in the hopper. It features an alloy block frame that houses two rollers on stainless steel real ball bearing instead of oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes it possible to drive the mill clockwise or counter-clockwise. Stainless knurled knobs allow a gap spacing adjustment range of 0.065". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.
As a consistent, precise crush is also vital for making the best beer possible, the roller is the most important part in the consistent crush. The DY368 roller is using food grade stainless steel, which has molybdenum added to its alloy content during production. Molybdenum provides an very high degree of corrosion resistance. This is an advantage for objects that require resistance to extreme environmental conditions such as salt water, de-icing salts, brine solutions, or other chemical forms of chemical exposure. Stainless steel excels in resistance to acids, bromides, and iodides at high temperature. It is durable, easy-to-fabricate, clean, weld and finish.
Specifications:
Materials: Stainless steel roller, 6061 Aluminum for the mill body and hopper
Voltage: 110V(US PLUG) or 220V (EU PLUG)
Power: 60W
Speed: 75RPM
Roller: 6"x1.5"diameter (15x3.8cm diamter)
Output rate: 20kg/hour (0.3kg/min)
Hopper capacity: 4L