Features:
Condition:100% Brand New
Color:Black
Light Color: Green
1-6 Gear display
Fitment:
For Versys 1000 2012-2018
For Vulcan S 650 2015-2018
For Vulcan 900 2006-2020
Installation:
Find the BLACK, 4-pole diagnostic connector (also called as DDA) under the seat.
- Detach the cover (cap) from the plug and connect the HZXHS plug.
- Connect the red line of the HZXHS meter to the blue 15 above the fuse.
Route the cable to the mounting location along the frame.
- Peel the green plastic off from the back of the unit, and mount the display.
- Secure the cable with the cable ties supplied.
Set up:
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
-Raise the rear wheel off the ground by using a stand, and start the engine in Neutral.(If you do not have a stand, you may setup the unit while riding. Find a long,straight road with light traffic.)
-The display will blink "1". Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.
-When the display shows "2", select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly. Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.
Package Include:
1 x Gear Indicator (Contains installation instructions)