Eastwood custom-blended Contour Premium Body Filler contains rust inhibitors to prevent corrosion long after paint has been applied. Its unique self-etching properties bite into the surface for excellent adhesion. This unique formula spreads and sands beautifully, thus eliminating pinholes. Furthermore, its excellent feather-edging properties wont clog up sandpaper. This premium body filler is a true one-step application, since no glazing putties are required. Includes hardener.
Application Tips: Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% liquid hardener. Do not exceed 1/4 inch depth. Allow to cure 15 min before sanding. Abrade with 40 to 80 grit and follow up with 120 grit to desired contour 5. If necessary, apply Eastwood Polyester Glazing Putty (13521zp) for final finishing. Topcoat with quality primer such as Eastwood Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.
Safety Information: Always wear eye, skin and respiratory protection when using this product always apply in a well ventilated area. Consult MSDS and product label for specific safety warnings.