Feature
●【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V The electronic pump only needs to connect the positive and negative wires. Those three electrocutions dont work. See the video on our page for details. Did you check the video? Just connect the positive and negative terminals of the straight power supply to the brown and black wires.
●【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term.
●【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant.
●【Warning】:In addition to power supply and wiring problems, water for testing should be well water, river water or sea water. Do not use pure water or reverse osmosis water. The main reason is that pure water contains no electrolytes and does not conduct electricity.
●【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc.
Description
Features：
Built-in inductive electronic switch(No separate float switch is needed).
Rustproof and corrosion resistant.
Fully automatic bilge pu.
Exclusive moisture tight seals.
Compact,efficient,long life motors.
Easy clean snap lock strainers.
Slient and vibrationless operation.
Anti-airlock protection.
Ignition protection
CE certifications
Product description:
Flow Rate: 1100GPH
Voltage: 12V Current: 3.2A
Outlet Dia: 29mm(1-1/8"),
Wire lead: 1m
- Package Included:
- 1 x 1100GPH Automatic Submersible Boat Bilge Water Pump
- Note
- 1.Do not put the wire connection in the water,otherwise the water pump will not work properly.
- 2.When the water pump cannot start or stop automatically,please clean these three sensing electrodes with a hard brush first.
|
|
|
|
|---|---|---|---|
| Electronic Bilge Pump 12v 1100gph | Automatic Boat Bilge Water Pump 12v 1100 GPH | Automatic Boat Bilge Pump Float Switch | |
| Volts | 12/24 Volts | 12/24 Volts | 12/24/32 Volts |
| Open Flow | 1100 GPH | 1100 GPH | |
| Outlet Pipe Diameter | 29mm | 29mm/1-1/8 | 3ft (1 Meter) |
| Current | 3.0/1.8A | 3.8/2.0A | 12/15/30A |
| Weight | 398g | 470g | 160g |
| Use with float switch | With Built-In Float Switch |