Feature

●FITMENT: Works for 1999-2014 Chevy Silverado and Sierra 1500 2500 2WD/4WD. For Standard Cab 2/4WD Silverado/Sierra 1500 with Oval Upper Mounts.
●FUNCTION: Used to attach a body and frame, provide necessary rigidity, yet have ample resilience to keep everything quiet. They outlast factory body mounts and provide a firm connection between the body and frame.
●NICE DESIGN: Holds super grease for quiet operation, reducing equipment wear, vibration and noise. Yoursme body mounts are the perfect upgrade for mushy and worn out stock rubber body mount bushings and are particularly beneficial in racing applications.
●PREMIUM MATERIAL: Made from premium grade polyurethane, which is anti corrosion and resistant to vehicle fluids and road grime. Outperform even new OE rubber bushings and last much longer without deteriorate.
●PACKAGE INCLUDED: 8 × UPR Body Mount Bushings, 8 × LWR Body Mount Bushings, 8 × Flat Washers


Description

11
11
11

Wide Application:

  • Chevrolet Silverado 1500 2WD - 1500 - 1999 - 4WD - 1500 - 2014
  • Chevrolet Silverado 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2014
  • Chevrolet Silverado 2500 HD 2WD - 2500HD - 2001 thru 2WD - 2500HD - 2006
  • GMC Sierra 1500 2WD - 1500 - 1999 thru 4WD - 1500 - 2014
  • GMC Sierra 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2004

INSTRUCTION:

  1. SPRAY liberally all mounting bolts and nuts to be removed with penetrating oil (ie. WD-40).
  2. SUPPORT vehicle body properly before removing mounts. (Recommended : Use a 2”x4” piece of wood 24” long or any other suitable size between the jack and body panels to spread the load out so as not to damage body panels). If necessary, support the body in several areas.
  3. LOOSEN all nuts and bolts but DO NOT REMOVE. Working from one side of the vehicle at a time REMOVE the nut and bolt from ONE mount location and raise body enough to replace mount, NEVER HIGHER. Check other areas of the body for interference problems when raising the body.
  4. REPLACE one mount at a time with similar size urethane mounts. If washers/sleeves have been provided, use in combination of original factory metal parts that are not replaced by hardware supplied in kit. SEE DIAGRAM for frame position and assembly order.
  5. After all mounts have been replaced, TORQUE ALL NUTS AND BOLTS TO FACTORY SPECIFICATIONS.

  • NOTE: RE-TORQUE all nuts and bolts after initial settling of mounts (approximately 1000 miles of driving) to insure that fasteners have not come loose.

Product information