Feature

●RASPBERRY PI 3 MODEL B+: Mini Computer with 1.4GHz Quad Core ARM Cortex-A53, 1GB LPDDR2 RAM, Broadcom VideoCore IV GPU, 4 Full Size USB Ports (Shared Bandwidth), USB 2.0 Gigabit Ethernet Port, HDMI 1.3 Port, 3.5mm AV Port (Composite Video Out + Stereo Out), MicroSDHC Slot, MIPI CSI Connector for Cameras, MIPI DSI Connector for Displays, 40 Pin GPIO Header, MicroUSB Power Connector
●AMAZING PERFORMANCE: Blazing Fast Quad-Core 64-bit CPU and Faster GPU opens a new realm of possibilities and applications limited only by your creativity
●REQUIRED ADDITIONAL COMPONENTS NOT INCLUDED: Certified 2.5A Power Supply and Properly Flashed MicroSD Card required for operation!
●PROPER POWER AND SOFTWARE: If the red LED on the board blinks or turns off at any time, your power supply is not providing adequate voltage. Without properly flashed MicroSD card, the board will not display anything on HDMI. The processor is 64-bit and can run Raspbian which is a 32-bit operating system.

[Pi 3 B+ 1GB]

Description

The Raspberry Pi 3 Model B+ is a mini computer with a quad core 64 bit ARMv8 CPU operating at 1.4GHz. It is almost three times as fast as the outgoing Raspberry Pi 2 Model B in many benchmarks.

With the increased performance comes higher power consumption and heat which is why we have paired it with our exclusive heatsink set. This kit will reduce hot spot temperatures and increase the stability of the Raspberry Pi 3 Model B+ under full CPU load.

The new board also has built-in support for wireless technologies like Dual-Band 2.4GHz 802.11N and 5GHz 802.11AC WiFi and Bluetooth 4.2 Low Energy. You no longer need to take up two USB ports and USB bandwidth so the performance as a NAS device increases. This is a welcomed addition that is bound to save many users the hassle of getting wireless setup.

Whats included:

- Raspberry Pi 3 Model B+ Mini Computer
- LoveRPi 10 mm CPU Heatsink with 3M Double-Sided Thermal Adhesive
- LoveRPi 5 mm LAN Heatsink with 3M Double-Sided Thermal Adhesive
- Element14 Quick Start Guide - Element14 Retail Box
- LoveRPi Troubleshoot Sheet

The Raspberry Pi 3 Model B+ will consume around 1.5A of current by itself. Secondary accessories can drive up current consumption to 2.5A. Do not drive 2.5A current for prolonged durations as it will shorten the lifetime of the board components.

Raspberry Pi is a registered trademark of the Raspberry Pi Foundation. Element 14 is a registered trademark of Premier Farnell. LoveRPi does not represent Raspberry Pi Foundation, Premier Farnell, or 3M.