[White 5S02]
[Black 11PM01]
[Black 11P02]
[Black 5S02]
[Black XS04]
[Black 11PM02]
TIPS:
1>If you have no experience in installation but would like to do it yourself, please watch the installation video on the details page carefully 3-5 times.
2>If you lack the ability to do it yourself, please find a professional to do the installation.
|
|
|
---|---|---|
High resolution |
High sensitivity |
Hard tempered glass, Anti water,oil and fingerprint |
|
|
|
|
---|---|---|---|
1. Watch instruction videoPlease view the instructuion video in item description. |
2. Disassemble the old phoneRead the guidance carefully and follow the instructions to disassemble your old phone. |
3. Test the new screenTake out the new screen, just connect the cables to test the screen before installation. |
4. Install the new screenFollow the instrcutions to install the new screen step-by-step. |
|
|
|
|
---|---|---|---|
Do It Yourself |
Save Time |
Save Money |
Privacy Protection |
A : When installing your phone, the display data cable may pop off its connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, please simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector. Also, the ribbon cable may be loose if the LCD connector is not fully installed, please try reinstalling the connectors for several times,and reset the phone by pressing both Power and Home Button together for at least 15 seconds.
A : This is because the digitizer cable might lose connection if not plugged in firmly,power off your phone, clean the connector on the mainboard, reconnect all the cables, hard reset your phone, then power on.
A : Check the LCD to make sure the flex cables are good and there are no debris on the connectors. Then reconnect all the cables and leave the phone alone overnight in a dry environment and power on the phone next day.
A : The home button has 2 connection points, one is connecting to the metal plate and another is connecting to the logic board. Please make sure both of them are fully connected. You will also need to re-power the phone to active the function of the home button.