●☛HC-05 BT Module is an easy to use BT SPP (Serial Port Protocol) module, designed for transparent WL serial connection setup ●☛HC-05 is able to operate in both master and slave mode ●☛Its communication is via serial communication which makes an easy way to interface with controller or PC ●☛Its ideal replacement to your wired serial connection ●☛Note: this module does not suitable for IOS system
[HC-05 Bluetooth Module]
Description
Aideepen 2pcs HC-05 Serial Module Slave and Master 6 Pin Serial Communication for Arduin0
HC-05 Module is an easy to use SPP (Serial Port Protocol) module, designed for transparent serial connection setup.HC-05 Master and slave Two in one module.
The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other BT 2.0 devices.
HC-05 : You can quickly add the BT feature to your Arduin0 project, and then you can use your android phone to control some gadgets, such as: switch, LED.
Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.The user can be set up.click the button into AT MODE.
Button: Can be switched via AT commands as master or slave mode by pressing the button, the device can be connected via AT commands specified.
6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 module to your Arduin0 Board.
Please note: iOS devices (iPhone) are not supported.
Module Features:
With the connection status indicator, LED flash indicates no Bluetooth connection; Led slow flash indicates enter at command mode
On-board 3.3V voltage regulator chip, input voltage DC 3.6V-6V; When not paired, current about 30mA (due to LED lights flashing, current in the state of change); After the pairing succeeds, the current is about 10mA
Effective transmission distance of 10 meters in open area, more than 10 meters is possible, but not to ensure the quality of the connection
After pairing succeeds, can be used as full duplex serial port. No need to understand any BT protocol, but only support 8-bit data bits, 1-bit stop bits, no parity communication format. This is also the most commonly used communication format, does not support other formats!
Press the key and then power up the BT module to enter at mode, set parameters and query information.
Can switch host and machine mode from at command.
Note: this module does not suitable for IOS system.
Specifications:
PCB Size: 37mm (Long) *17mm (wide)
Weight: 3.5g
Input voltage: 3.6V--6V, prohibit exceeding 7V
Leads 6 feet: EN/VCC/GND/RXD/TXD/STATE
Default baud rate:9600
Default pairing password:1234
Default name is HC-05
Reference distance:10m
Package Included:
2* HC-05 6 Pin module
Looking for specific info?
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.
Videos
Help others learn more about this product by uploading a video!