Feature
●【Compatible for ROVE R2-4K with USB-C Port, R2-4K PRO and R3 Dash Cam with USB Type C】 This dash cam hardwire kit is specially designed for ROVE R2, R3, and R2-4K PRO dash cam to be used for 24-hours parking monitor.
●【24/7 Parking Monitoring for Supercapacitor Dash Cam】ROVE R2-4K (with USB-C Port Only), R3 & R2-4K PRO have a 24-Hour Parking Monitor feature - This hardwire kit provides continuous power to your camera when your car is parked.
●【Clean Installation - Ditch the USB 12V Car Charger】You can use this dash cam hardwiring kit for clean installation in your car. This dashcam hardware kit connects to your cars fuse box directly hiding all the cables neately.
●【A Complete dashcam hard wiring kit 】All necessary fuse taps, volt meter, and other components are included in our kit for an easy installation and user experience that you will only get with ROVE.
●【Easy DIY Installation Manual Included】Our products come with a beautifully written user manual, and how-to videos are also available which you can follow easily step by step.
●【Important NOTE】The included fuse taps are NOT compatible with the following vehicles due to their unique fuse box design: 2021 Ford F150, 2011 Ford F150 Lariat, Ford F350, 2011 Ford Edge, 2013 Ford Explorer, 2013 Ford Expedition, 2021 Ford Ranger, 2013 Ford F150, 2016 Ford Expedition, 2014 Ford F250 Super Duty, Mazda CX5 2021, 2012 Chrysler 300C AWD, 2024 GMC Sierra HD, 2014 Jeep Cherokee KL, 2021 Chevrolet Tahoe, 2021 Jeep Grand Cherokee, 2022 Jeep Gladiator, 2023 Hyundai Palisade & Audi Q5.
●【Exceptional Customer Care】 – ROVE is a USA-Chicago-based customer-centric company, we prioritize your satisfaction. Enjoy a full, hassle-free 1-YEAR WARRANTY with dedicated customer support. Text us for a faster response or email our customer care team for any inquiries or issues. Additionally, we offer a FULL REFUND within 30 DAYS if you have any doubts.
Description
ROVE Ultimate 3-Lead Hard Wire Kit With USB Type - C For ROVE R2-4K, R2-4K PRO & R3 Dash Cam Models –
ROVE Ultimate 3-lead Hardwire Kit - USB Type-C is a power management device that provides power to your R2-4K(with USB-C Port Only), R2-4K PRO & R3 dash cam models, and most other dash cams with a USB Type-C connector from your cars battery via fuse box to keep your device continuously running even after your cars engine is turned OFF to utilize the 24-HR Parking Monitor feature.
COMPATIBILITY
The ROVE Ultimate 3-Lead Hard Wire Kit With USB Type-C is Specially designed for:
- ROVE R2-4K Dash Cam (with USB-C Port Only), Powerful 4K Dash Cam with Built-in Wi-Fi 6, GPS Supercapacitor
- ROVE R2-4K PRO Dash Cam, Front Channel 4K Dash Cam, Built-in 5G Wi-Fi, GPS, Supercapacitor.
- ROVE R3 Dash Cam, 3” IPS Touch Screen, 3 Channel Dash Cam Front, and Rear with Cabin.
Complete Installation Tools Set Included - Easy to Install - Designed for 24-HR Auto Trigger Parking Monitor
|
|
|
|
|---|---|---|
Decide A Perfect Place To Mount Your ROVE Dash CamThe best place to put the dash cam is where you can easily use it. That means the camera view is unobstructed, you can easily remove it when needed, and it is discreetly placed. The key to mounting a dash cam is placing it where the ROVE R2-4K or R2-4K PRO or R3 have a clear view and it doesn’t block your view. |
Locate The Fleet’s Fuse BoxLocate your vehicles fuse box using your Fuse Box Diagram. This information can usually be found in your vehicle’s Owner’s User Manual or from your manufacturer’s website. You can access the fuse box simply by lifting a tab or pulling a panel with your fingers, Or some may require the included trim tool. |
Determine The Correct Fuse Slot For InstallationYou will need to find two fuse slots to be used in this step.
|
|
|
|
|
|---|---|---|
Install An Add-A-Fuse Tap1. If you are using the previously identified fuse slot that has an existing fuse in it, then insert that existing fuse into the lower empty slot of the Add-A-Fuse with correct orientation. (See BLUE Arrow in the above image) 2. However, if your previously identified slot is empty and there is no existing fuse in it, then you can just install the Add-A-Fuse directly without needing to install 2nd fuse into the empty slot of an Add-A-Fuse tap. |
Fit The RED & YELLOW Fuse Taps To The Respective SlotsYELLOW: Now turn your car keys to ACC position. Now touch the voltmeter to the aluminium end of the YELLOW Add-A-Fuse to check the voltage. Your voltmeter should read the incoming voltage. It is getting power through the ACC fuse slot. RED: Turn OFF the car. Now touch the voltmeter to end of RED Add-A-Fuse. Your voltmeter should read the incoming voltage. If YES, then great job. It is getting power through the always hot fuse slot. |
Locating A GOOD Ground PointConnect the BLACK Wire to the Grounding Screw or Bolt. We recommend that you choose the metal Chassis Grounding Screw, or it may cause your dash cam to not function properly and restart/reboot when power does not flow properly. |
TEST THE DASH CAM - TUCKING UP AND ROUTING ALL THE CABLES NEATLY
LOW VOLTAGE PROTECTION - OVER CURRENT/SURGE PROTECTION
LOW VOLTAGE PROTECTION
The ROVE Ultimate 3-Lead Hard Wire Kit - USB Type-C will monitor your voltage status and cut off the power to the dashcam if the voltage drops below the configured value. This minimum voltage cut-off is 11.8VDC for a 12VDC battery and 23.6VDC for a 24VDC battery. This protects the vehicle’s battery. And reserves enough power so you can start your car for the next time. You have four different configuration choices that you can select when you want the power to be disconnected to the dash cam when the battery’s voltage reaches a certain level.
OVER CURRENT/SURGE PROTECTION
The ROVE Ultimate 3-Lead Hard Wire Kit - USB Type-C can detect abnormal over-voltage status and cut off power to prevent any damage to your dashcam. Additionally, the ROVE Hardwire Kit has a built-in extra fuse box (2A) to have extra protection.