[1 & 2-Inch Shank Finger Joint Router Bit]
[1 & 4-Inch Shank Tongue and Groove Router Bits]
[1 & 2-Inch Shank Adjustable Tongue and Groove Router Bits]
[1 & 2-Inch Shank V- Notch Tongue Groove Router Bits]
[1 & 4-Inch Shank Finger Joint Router Bit]
[1 & 2-Inch Shank Tongue and Groove Router Bits]
Tongue and Groove Router Bits Set is used to produce shaker rails and door frames for cabinet doors, floors, paneling and many other projects.The Router Bit Set can make perfect tongues or grooves and make them fit perfectly.The gap between the grooves can be adjusted to increase the fit by using the trim spacers (thickness: 0.2mm, 0.5mm) included with the kit.
Create a tongue and groove for a perfect connection between two materials.
Each bit is powder coated for an extra layer of protection.Enclosed bearing roller makes for easy alignment for a dreamless operation.
C3 Tungsten carbide blade provides a clean and accurated cut.
|
|
|
---|---|---|
Quality ConstructionC3 Tungsten carbide blade provides a clean and accurated cut.1/2 inch shank also fits most routers for easy installation and safe use. |
Smooth OperationEach bit is powder coated for an extra layer of protection. This allows you to use multiple times.Enclosed bearing roller makes for easy alignment for a dreamless operation. |
Scope of applicationFor cut wood,MDF,particle board, plywood,etc. |
|
|
|
|
---|---|---|---|
Advanced MaterialsFivepears products are made of C3 hard tungsten steel and 45# carbon steel for durability. |
Clean CuttingSharp cutting edges made of Fivepears C3 grade carbide for smooth cuts |
Shear Angle DesignFivepears shear angle design, smooth mirror surface helps chip removal speed |
Professional bearingA good bearing can often do more with less, Fivepears’s bearing can help you control the cutting speed and guide you to cut in the right direction. |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|
FivePears 2 Pcs of Tongue and Groove Router Bits Set(1/2’’ shank) | FivePears 2 Pcs of Tongue and Groove Router Bits Set(1/4’’ shank) | FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set | Fivepears 1/2 inch 12Pcs set | Fivepears 1/4 inch 12Pcs set | |
Product | FivePears 2 Pcs of Tongue and Groove Router Bits Set(1/2’’ shank) | FivePears 2 Pcs of Tongue and Groove Router Bits Set(1/4’’ shank) | FivePears 1/2 inch Rabbet Router Bit with 6 Bearings Set | Fivepears 1/2 inch 12Pcs set | Fivepears 1/4 inch 12Pcs set |
Packing | Plastic case | Plastic case | Plastic case | Wood case | Wood case |
Bits in set | 2 Pcs | 2 Pcs | 2 Pcs | 12 Pcs | 12 Pcs |
Purpose | Set for Tongue & Groove joint | Set for Tongue & Groove joint | Set for cutting rabbets of different depths | Multipurpose for beginner | Multipurpose for beginner |
Shank | 1/2" inch shank | 1/4" inch shank | 1/2" inch shank | 1/2" inch shank | 1/4" inch shank |
Material | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank | C3 Tungsten Carbide Cutters, High-quality Alloy Steel Shank |
Operate Speed | Max. 18000 RPM | Max. 18000 RPM | Max. 18000 RPM | Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm | Router diameter / operate speed below 1" (25mm) / 18,000~24,000 rpm 1"-2" (25-50mm) / 16,000-18,000 revolutions 2"-2 1/2" (50-65mm) / 12,000-16,000 rpm 3" or above (>= 65mm) / below 12,000 rpm |