Feature

●Push button to start recording immediately or program to start recording at a later time and date
●High accuracy and repeatability
●Multiple alarm set points
●Integral USB interface/connector (no cable required)
●Up to 64,000 samples per recording session

[10V Standard Battery]

[10V Long Life Battery]

[1V Long Life Battery]

[500mV Long Life Battery]

[5V Long Life Battery]

[5V Standard battery]

[1V Standard battery]

Description

The Track?It DC Voltage and Current Data loggers are two channel battery powered stand alone compact data loggers that record up to 32,000 samples each of DC Voltage or Current data. Units are available in 4 DC voltage ranges or for DC current. The unit is easily configured using the included Track?It Software. Simply plug the logger into an open USB port on your PC and the software automatically identifies the logger. Configure the unit to start and stop recording at a predetermined time and date or only when an alarm condition is sensed. The sample storage rate can be set from 1 sample every 2 seconds to 1 sample every 24 hours. The on board data storage is non?volatile so data will not be lost in the event of a depleted battery.