Feature

●Multiple modes: music mode, brake light mode, 16-color mode, dynamic mode.Attention: Only be applied to DC 12V; Red Wire (Positive) with In-Line Fuse, Black Wire (Negative), Blue Wire (Brake light)
●According to the upgraded product recommended by 1 star, a power extension cord and product manual are included to enhance the waterproof and sealing performance, and can be used in rainy days.
●Multiple operation modes: APP control, 2pcs 4 key control operation, adding a DIY switch to control switching power supply,For specific operations, please refer to the user manual and video operation.
●Easy Installat：With super sticky tape on the back of the motorcycle strip lights and flexible design, it’s easily to be bent or curved to desired position.
●Universal: Our motorcycle light kit fits all motorcycle, car, ATV, SUV, Vans, Jeep, bike, trucks and etc whose power is DC 12V. Especially, it fits these motorcycles such as Harley Davidson Touring Kawasaki Suzuki Ducati Can AM Polaris Honda CBR Toyoda Sportster Yamaha Bike.

Description

Multifunctional LED Kit

2pcs 4-key control operation, you can use the 4-key control to switch colors, red, green, blue, yellow, white... a total of 16 monochrome static modes, 4 dynamic flashing modes, strobe, suction flash, colorful flash, RGB burst flash.
Voice control mode, when playing music, the LED will change with the rhythm of the music.
Smart brake mode, when the motorcycle brakes, the LED will light up in Red.

Double-sided adhesive sticking skills:

The location to be pasted must be cleaned up, and the surface must not be attached to dust or oil stains. You can use alcohol or pure water to clean the location that needs to be pasted, and then paste it after the surface is dry.
During the pasting process, do not touch the surface of the double-sided tape with your hands. The stickiness of the double-sided tape will be greatly weakened due to oil stains or fingerprints on your hands.
If you are worried that the paste is not strong enough, you can use a lighter or a hair dryer to heat the surface of the double-sided tape. After heating, quickly paste and install it more firmly.
After pasting, press it by hand for more than 30 seconds to exhaust the air in the double-sided tape, and the double-sided tape will be firmer after it is fully bonded!

Note: Do not touch water within 24 hours after the double-sided tape is pasted! If contact with water will affect the adhesion of the double-sided tape!

LED kit specifications:

Working voltage: DC12V
LED type: 5050
Color: RGB multicolor
LED power: 19W
Control: 4 key / APP
Mobile system: Android or IOS
Brake function: Yes
Voice control function: Yes
Battery: Yes (4-KEY control with battery)

Motorcycle LED Strip

Three different sizes of LED light bars can be used for different models of motorcycle brands. The 8 PCS LED light bar is sufficient to illuminate the entire vehicle. And it’s waterproof, you can use it in rainy days, and you can wash your car with confidence.

The 8PCS LED strip is sealed with silicone for waterproofing. After installation, you can drive in rainy days. Clean and wash the motorcycle normally.
5050LED lamp beads, integrated red, green and blue highlight chip.
The PCB circuit board adopts double-sided circuit design and FPC soft material, which can be bent into an arc shape.
High-viscosity acrylic double-sided adhesive, the installation position needs to be cleaned before installation, the longer the time after installation, the stronger the adhesion.

DXX motorcycle lights with wireless remote control

RF Wireless Remote Control

The package contains 2pcs portable keychain 4-key control, no more worry about forgetting or losing because we have 2pcs spare
4-key Control: It can be carried with you and can switch the LED mode at any time. It can realize monochrome static switching, dynamic mode switching, voice control mode switching, and ON/OFF.

Mobile APP control LED color

Through the mobile phone APP, you can achieve 256 color spectrum adjustment, change the color or customize your favorite color, and change the LED flashing mode, including 22 dynamic flashing modes such as burst flashing function, gradient flashing function, and colorful jumping flashing function.
APP installation is convenient: just scan the QR code attached to the product to download and install the APP, or you can download it in the App Store or Google Play (for detailed methods, please refer to the instructions attached to the product)
The APP function is not mandatory to use. If you dont use the APP function, you can use it just like the 4-key control!
The use of APP does not need to obtain mobile phone information, does not need to log in, does not need to be connected to the Internet, and does not violate personal privacy. This is a function that is widely liked and pursued by young users!

Motorcycle LED light belt installation method

Easy Installation

There are 2 installation and wiring methods, which can be freely chosen.
1 The red wire is connected to the positive VCC of the power supply, the black wire is connected to the negative GND of the power supply, and the blue wire is connected to the positive VCC of the brake light. When braking, the LED is forced to light up in red to improve the recognition of safe driving.
2 You can choose to increase the installation of a power switch (the switch is included in the kit), which can be used as the main power switch of the LED kit. When the motorcycle needs to be parked for a long time, you can turn off the power to no longer consume current and protect the battery life.