Feature
●Low friction.The bearing rubber end seal is nice and clean.Very exquisite movement on the rod.They can slide smoothly along the rods and relatively quiet.Perfect snug and pretty smooth.
●Mild design.Smooth round edges.The linear ball bearings will not scratch your linear rods.They fit perfect with 8mm rod and slice forward,backward smoothly.Well lubricated and smooth going along the linear rods for your 3D printer.
●Sturdy.This bearings wont loose fit and wobble.If dry fitted to rods it is likely some of the balls will fall out,so the ball races must be filled with Lithium based grease before installing.
●After using for a while,you can remove,clean and grease them.This LM linear ball bearing can easily be done by squeezing a clot of grease into the passage,and then carefully insert a rod into both ends,and slowly press the rods together.Repeat until grease oozes out both ends of the bearing,indicating the races are full.
●It is usually used for 3D printers and CNC machine tools.High rigidity and long-lasting. Tips:They are dry when you receive it,no rust oil and grease.Make sure you pack them with fresh lithium grease before first use.
[10mm-4Pieces]
[8mm-4Pieces]
[6mm-4Pieces]
Description
Material:Carbon steel Color:Silver tone Quantity:4pieces Size:Inner diameter:8mm,outer diameter:15mm,total length:24mm Type:LM8UU The bearing rubber end seal is nice and clean.Action smooth and quiet.The linear ball bearings will not scratch your linear rods.They fit perfect rod and slice forward,backward smoothly.After using for a while,you can remove,clean and grease them.