Feature
●【Safety Bollards Protect】- Safety bollards protect people and facilities from vehicle collisions by creating a physical barrier without impeding pedestrian flow. They can effectively prevent important objects from being damaged by impact, and can be used indoors and outdoors.
●【Impact-Resistant Design】- The wall thickness of the safety bollard is designed to be 0.12 inches, and the thickness of the surface coating reaches 80μm. In addition, the bottom adopts a sealed design, which greatly increases the grounding area. These designs allow the bollard to efficiently absorb vehicle energy and withstand greater impacts.
●【High Visibility】- Black and yellow reflective tape on top can increase visibility in low light, night or bad weather conditions. The powder coating process can protect the steel bollard from oxidation, rust and fading, and prolong the service life.
●【Easy to Install】- This safety bollard includes expansion screws and wrench required for installation. Find the correct location, drill holes, tap into expansion screws and tighten. Only need the above four steps to complete the installation.
●【Applicable Places】- Safety bollards protect pedestrians, work areas and storefronts from traffic collisions. They can be installed in divider driveways or directions, next to buildings or entryways, in front of water and gas meters, in warehouse shelf corners, and more.
[48 Inch]
Description
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|---|---|---|---|
| Steel Bollards 36“ | Steel Bollards 42“ | Steel Bollards 48“ | |
| Material | Q235 Steel | Q235 Steel | Q235 Steel |
| Number | 2 Pcs | 2 Pcs | 2 Pcs |
| Height | 36" | 42" | 48" |
| Pipe Diameter | 4.5" | 4.5" | 4.5" |
| Pipe Thickness | 0.12" | 0.12" | 0.12" |
| Powder Coating Process | ✓ | ✓ | ✓ |
| Yellow & Black Reflective Tape | ✓ | ✓ | ✓ |