[Aluminum 3  & 8  D x 5.62  L]

[Aluminum 3  & 8  D x 3.54  L]

[Aluminum 10 X 80mm]

Zerk Injection Packer 13*145mm 100pcs Package Injection method statement 1.Identify the crack. 2.Drill the hole 5 to 10 cm away from the crack at 45 toward the crack. 3.Clean the hole properly. 4.Insert the packer. 5.Fix and tight the packer. 6.Connect the pump to the packer and start injecting. 7.After injection material is totally dry remove the packer. You have decided on the grout and got the right pump. Now you move on to step three: Which packers or ports will you decide? Is more expensive always better？Zerk Injection Packer/Bottom Injection Packer/ Plastic Surface Packer which is your choice for todays crack? Well, it all depends. The injection method and the selected material will help you to determine the Packer Selection. Are your cracks actively leaking, are they dry, do you use epoxy or do you inject polyurethane, or Acrylic liquid? How much pressure will be used? how do you connect your grout line?There are two primary categories of packers available. Insertable packers (mechanical packers) and surface mountedports. Mechanical packers are typically used for polyurethane injection and high pressure epoxy injection, Acrylic Injection. Since they are not glued to the surface, they work well in wet areas and with decayed problem concrete. Mechanical packers come with zerk fittings and button heads (slide fittings). The zerk type is more commonly used and is less costly. It easily connects and disconnects and works nicely with medium to high injection pressures. The button head type can be of advantage in high volume applications and it offers a superior connection which is helpful for single operator injection and large applications. A plastic surface packer is widely used for ground dry crack repair Injection pressure is the keyword. Adoration Inc. Supply all above packers welcome asking us for products recommendation, check us for detail.