Feature

●Effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V.
●3mm screw holes on the motherboard, easy to install
●The sensor module output port OUT can be directly connected to the microcontroller IO port can, also can drive a 5v relay directly.
●Use DC 3-5V power supply. When the power is turned on, the red power indicator lights
●Application:widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.

[010232-20]




[SR501-5]




[AM312-5]





Description

20 PCS IR Infrared Sensor,Aideepen Obstacle Avoidance Sensor Module 3-Wire Reflective Photoelectric for Smart Car Robot

Feature:

1, When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.

2, The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance.

Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.

3, the sensor module output port OUT port can be directly connected to the microcontroller IO can also be directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO

4, comparators LM393, stable;

5, the module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;

6, with the screw holes 3mm, easy fixed installation;

7, each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.

Package Includes:

20 * IR Sensor Module

20 PCS IR Infrared Sensor20 PCS IR Infrared Sensor
20 PCS IR Infrared Sensor20 PCS IR Infrared Sensor

PIN Description:

  • VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)G
  • ND GND External
  • OUT small board digital output interface (0 and 1)