Feature
●✅𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍:Suitable for all kinds of plane product printing, like: electronic circuit board, paper box, glass, board, metal plate, and all kinds of board, etc. Do not recommend to use this machine for cloth, ribbons, sashes, paper, thin plastic sheets and other light materials.
●✅𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐁𝐋𝐄 𝐅𝐑𝐀𝐌𝐄 𝐒𝐈𝐙𝐄:The machine is suitable for screen frame of various materials with inner dimension 21.6 inches wide, 25.6 inches length and 2.3 inches thick.The recommended printing area is 19.6" x 23.6" (50x60 cm).
●✅𝐑𝐔𝐁𝐁𝐄𝐑 𝐒𝐇𝐄𝐄𝐓 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃:Equipped with a rubber sheet,size 19.6" x 23.6" (50x60cm). It is used to place on the table under the printing object.
●✅𝐅𝐋𝐄𝐗𝐈𝐁𝐈𝐋𝐈𝐓𝐘:With the bolt in the balance rack, could adjust the lifting angle and height of the screen frame.It is suitable for printing of various substrates within the thickness of 1.57 inches.
●✅𝐄𝐀𝐒𝐘 𝐎𝐏𝐄𝐑𝐀𝐓𝐈𝐎𝐍:This printer should be fixed on the table or plank, equiped with 3 handles / 2 support holders/ 4 gravity balance plates. Balance plate can be installed individually or together according to weight request, it can be moved forward and back within 6 inches.
[9.8 x2.4 ]
[20 x2.4 ]
Description
|
|
|
|
|---|---|---|
|
The chunk is 480mm wide and 80mm high,and it is suitable for all kinds of screen frames with thickness below 60mm.There are three grille fixing handles installed in the chunk,it is stronger to fix the screen frame |
Lifting gravity balance plate of the screen frame can move 100mm forward and back according to needs(the machine is equipped with 2 gravity balance plates,which can be installed individually or together according to the need of balance).If the frame weight is too big,heavy object can be added on the top of the balance frame gravity hole.The middle part of the balance frame is equipped with a height handle which can adjust the height of the screen frame after lifting according to the need. |
The screen chuck shall be directly fixed on the wooden working table by self-tapping screws or fixed on the metal or wooden working table by self-tapping M8 bolts(the machine is equipped with 4 screws and 4 sets of M8 screws and nuts) |
|
|
|
|
|---|---|---|
|
The chunk can be raised or lowered 40mm by loosening the hinge screw of the elastic chunk,and it is suitable for printing of various substrates within the thickness of 40mm |
The main body of the machine adopts advanced electrostatic spraying metal surface treatment，acid and alkali resistance,corrosion resistance,cleaning resistance,no rust,long time use;Some parts are made of stainless steel. |
Equipped with 500*600mm in length and width and 2mm in thickness of a flat high-grade rubber board,which can be directly plaved on the desktop and used as the substrate for printing.The rubber base plate is also arranged according to the need,suitable for printing |
|
|
|
|---|---|---|
| Screen Printing Clamp-20x2.4in | Screen Printing Clamp-9.8x2.4in | |
| Clamp size | 18.9" x 2.4" (48x6cm) | 9.8"x2.4"(25x6cm) |
| Suggest printing area: | 19.6" x 23.6" (50x60cm) | 1.8" x 17.7" (30x45 cm) |
| Size of Rubber Sheet | 19.6" x 23.6" (50x60cm) | 19.6" x 11.8" (50x30cm) |
| Suggest max screen frame size: | 21.6" x25.6 x 2.3" (55x65x6 cm) | 13.7" x19.6" x 2.3" (35x50x6 cm) |
| Handle Quantity | 4 | 3 |
| Holder Quantity | 3 fixed holder | 2 fixed holder |
| Balancer Quantity | 2 | 1 |