Feature

●Not a OEM,Just a empty case, no electronics,no circuit board included
●Open this key case Way; There is a screw on the back that needs to be removed first. Then the two silver side pieces slide to the side (one up, one down) and then pulled outward. the left side (buttons facing toward you) goes down and the right goes up. They are a little difficult to slide by hand, I recommend using a flat head to push down and up on each side
●This is a replacement part to match the original key in form and function
●Each item have been tested before ship. high quality material and meticulously crafted.
●Package:1 x Uncut Flip key case; shipping with tracking NO,about 6-15day arrival,


Description

Open this key case way:
There is a screw on the back that needs to be removed first.
Then the two silver side pieces slide to the side (one up, one down) and then pulled outward.
the left side (buttons facing toward you) goes down and the right goes up.
They are a little difficult to slide by hand, I recommend using a flat head to push down and up on each side.

Work For: 2006-2010 Toyota Avalon
2006-2010 Toyota RAV4
2006-2010 Toyota Corolla
2007-2010 Toyota Yaris
2007-2011 Toyota Camry
2009-2010 Toyota Matrix
2009-2010 Toyota Venza
And other model with the same shape & buttons, Electronics/chips isnt included

Key Blade: Yes (Uncut)
Transponder Chip: NO
Electronics/Battery: NO Blade Size:46mm X 8.5mm
Non OEM ,Make sure the same with your original key
Package Included: 1 X Uncut Flip Key Shell (Not included chips)

Note: Please compare the size and shape with your old key prior to purchase.

Features:
Non OEM ,4 buttons(lock,unlock,and panic,Trunk),Make sure the same blade type
Package Included: 1 X Uncut Remote Key Shell Case with 4 buttons (Not included chips)
1- you need to check with your local dealer to verify its compatibility with your vehicle.you need confirm your current remote key looks the same with ours.
2- This is just a Empty key shell, there is no interior (remote/electronics/transponder chips) inside.
3- If you have a worn & broken Key Blank /Remote Case, all you need to do is take the internal electronics (include immobilizer/transponder chip)
from original remote and place them to our key shell,then the uncut keyblade will have to a locksmith or a dealer to be cut to match your car.
This item isnt a remote,it is just a Key Case shell.