Feature

●DESIGNED FOR POLYSTYRENE FOAM CUTTING --- Styrofoam polystyrene cutting pin (us plug) perfect for polystyrene foam cutting, carving and write words on the foam. And the hot wire cutter heats up quickly, very convenient to use.
●EASY TO MANIPULATE --- It cuts the foam smooth and fast, seals the edges clean, and leaves no debris.Ergonomic design handle with red start switch that make it easier to operate, comfortable to hold.
●FUNCTIONS OF PROTECTION --- The new power supply comes with the functions of over-voltage protection, over-current protection and overheating protection. Automatically power-cut after overload, increasing the service life.
●ATTENTION WHEN BENDING BY HAND --- The feature of hand bending is that the right angle is natural and does not affect the performance of the internal heating wire. It can be marked at the four corners of the heating tube to improve the accuracy of the bending dimension.
●USE: --- Do not touch any hot surfaces. The tips will become very hot during operation. Seals edges and leaves no debris, Cuts to any shape or angle. 110V AC power adapter with LED power indicator and on/off switch.


Description

Specification:
Model: AIK-50
Material:Nickel-chromium,Gold,Stainless Steel
Weight: 290g/10.2oz
Power: 30W
Normal temperature resistance: 20
Maximum temperature resistance: 200
Pen Point Length: 25cm/9.8inch
Voltage: 110-250V
Plug Type: US Plug
Product Instruction Information: 
There are some errors in the length of the pen tip due to different factory batches
Work continuously for no more than 0.5 hours, accumulatively no more than 2-3 hours
Pen power supplies of different lengths cannot be mixed. Each heating pen has its own independent power. Mixed use is either not hot or will burn.
1. The heating tube of the cutting pen can only be bent once, not repeatedly at one point. Bending repeatedly at one point may cause breakage
2. Because of its special structure, the cutting pen can only cut medium and low-density foam, and cannot cut materials other than foam. It is not suitable for high density or batch cutting.
3. Continuous cutting does not exceed half an hour, the power supply of the cutting pen is equipped with a switch, and the power supply can be prolonged after cutting.
4. We will power on the test again before delivery, so there will be slight foam marks on the pen barrel.
5. If you need to work for a long time, please choose a desktop cutting machine


Package Includes:
1 x Foam Cutting Pen 
1 x Power Adapter


Note:
1. Do not touch any hot surfaces. The tips will become very hot during operation.
2. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
3. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.