Feature
●Dent repair tool with tabs of 18 different sizes is ideal for removing dents in automobiles.Dent repair tool for repairing surface dents for working on trucks, automobiles, motorcycle bodies, refrigerators, doors.
●Dent Puller kits are made of high quality materials and are built to last. After using the car body dent puller, you can store it away for next use. Dent removal set is the must-have tool when you have a car dent problem.
●The base of the dent puller tool is filled with rubber to prevent the paint from scratching the original finish. All materials in our dent remover are free of chemicals or other undesirable materials. Glue can be easily removed without damaging the original paint.
●Paintless dent repair kit is easy to use, even a girl with little strength can easily repair it. Most car dents can be done in a short amount of time, and repair tools can save you a lot of money and time and improve work efficiency.
Description
Dent repair tool is the necessary tool for each family. It is easy to use, and the boy girl can be used easy. Dent repair tools can save your large amount of money and time. We are also equipped with 18 different sizes of blue dent puller tab to fully meet the daily needs of different dent.
Wide Application
|
|
|
|
|---|---|---|
|
|
|
|
Package Include
1 x Golden dent lifter
1 x Hot glue gun
10 x Strong stickiness hot melted glue sticks
18 x Blue dent puller tab
2 x Glue shovels
1 x Empty plastic bottle
1 x Blue towel
Strong Point
- A dent repair tool that helps repair dents in your car.
- Car dent repair card for various purposes.
- The base of the dent puller tool is filled with rubber to prevent the paint from scratching the original finish.
- Widely used for sheet metal processing in automobiles, refrigerators, motorcycles, washing machines, etc.
How to Use?
|
|
|
|
|---|---|---|
|
1. Wipe the surface of the dent with a damp cloth. |
2. Put the glue stick in the glue gun and preheat it for about 10 minutes. |
3. Apply hot bond to the tip of the tab. Then quickly apply the tab to the center of the dent and wait within about 5 minutes. (Note that the adhesive must not be completely cured). |
|
|
|
|
|---|---|---|
|
4. Insert the rear edge of the tab into the dent repair tool and start adjusting the height of the tool. |
5. Gradually pull on the tab, and when it finally flattens, the tab will pop off the hot bond. |
6. Clean the surface with alcohol and remove the remaining glue with a yellow scraper. |
