Feature
●Updated Cr12MoV Replaceable Blade: With sophisticated blade processing technology and strict quality control, we utilize upgraded Cr12MoVblades that would not deform easily and serve you longer. The high density and high impact resistant PVC material shell allows for a longer service life and excellent heat dissipation.
●Wide Cutting Range and Fast Cutting Speed: Cutting capacity ranges from 3/20"(4mm) to 3/4"(20mm). Cutting speed 3-3.5s which can satisfies your various cutting demand. Replaceable sharp alloy steel blades with 4 sides reversible cutter jaws realizes manual-like precision.
●Pure Copper Coil Motor: Pure copper coil motor 1250W powered by hydraulic pump ensure higher reliability of hydraulic rebar cutter, which means excellent motivation yet low noise, cutting at a lightning speed. The needle bearing drives the motor to rotate, allowing the motor to run more smoothly to achieve the minimum friction and the minimum power consumption.
●One Button Operation: Simply press the button and begin cutting in seconds to finish your accurate cutting and raise your working efficiency greatly. Ergonomic grip design of our rebar cutter facilitates maneuverability and ease of use and safety.
●One Year Warranty: Apart from 1 year warranty provided against manufacture defects, we offer one extra set of free universal blades and a pair of well-tailored, soft gloves in the portable stainless container for your convenience.💪 Please do Not cut the cable with the rebar cutter, which will jam the machine. (If you need to replace the blade, please refer to ASIN:B08QM8QW5K)
[1350W RC-22]
[1250W RC-20]
[900W RC-16]
Description
|
|
|
|
|---|---|---|
Highly uniformed gloss and colorWith adoption of advanced paint technology on the surface, the gloss and color of the hydraulic cutter are highly uniformed. |
Multiple screwsMultiple screws fixed on the head enforce the safety and longevity of the rebar cutter. |
Portable containerA sturdy and durable stainless iron made container featuring two lockable hinges and a handle to carry,reduces the cost of on-site rebar cutter installation and offers job site simplicity. |
- It is strictly forbidden to cut materials that exceed the specified diameter and strength, so as not to affect the life of the machine.
- The steel bars must be placed horizontally at the bottom of the clamping fixture and make an angle of 90° with the axis of the chuck.
- Loosen the switch immediately after it is cut to the end, and it is strictly forbidden to keep pressing it to avoid damage to the hydraulic bearing and motor
- It is normal for the pump body to heat up after cutting off for dozens of times. Be sure to let the machine cool to normal temperature before using it to avoid damage to the pump body and seals due to excessive temperature.
- Regularly check whether the screws of the pressure relief valve base are loose and tighten the screws to avoid oil leakage affecting the cutting force.
- Replace the hydraulic oil regularly, usually every 3-4 months.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| RC-16 #5 rebar cutter | NRC-16 #5 rebar cutter | RS-16 #5 rebar cutter | RC-20 #6 rebar cutter | RC-22 #7 rebar cutter | RB-16 #5 rebar bender | |
| Cutting/Bending size | Cutting up to 5/8 4-16mm #5 Rebar | Cutting up to 5/8 4-16mm #5 Rebar | Cutting up to 5/8 4-16mm #5 Rebar | Cutting Up to 3/4" 4-20mm #6 rebar | Cutting Up to 7/8" 4-22mm #7 rebar | Bending up to 16mm 5/8" #5 rebar |
| Cutting/Bending speed | 2.5-3S | 2.5-3S | 2.5-3S | 3-3.5S | 3.5-4S | 2.5-3S |
| Wattage | 900W | 900W | 900W | 1250W | 1350W | 900W |
| Bending Angle | / | / | / | / | / | 0-130 Degrees |
| Voltage range | 110v-130v | 110v-130v | 110v-130v | 110v-130v | 110v-130v | 110v-130v |
| Applicable hydraulic oil type | #46 | #46 | #46 | #46 | #46 | #46 |