How to Use: 1. Before starting, please make sure that the printer driver has been installed on your computer and it can work normally. 2. 2.1 Insert the AC power adapter into the power connector on the print server; 2.2 Connect the print server to your printer using the provided printer cable; 2.3 Connect the print server to your router with an RJ45 cable. 3. If you want to configure the internet segment, you can connect to the WIFI from the print server to enter the configuration interface. 4. Configure the print server 4.1 In for Win, go to Start > Devices and Printers and highlight your newly installed printer. 4.2 Right click on it and select Properties. 4.3 Select TCP/IP port and add new port. 4.4 Click "Next". 4.5 Enter the IP address of the print server. Click "Next". 4.6 Select "User Defined" and click "Next".Wait about 1 minute... 4.7 Click "Finish" 4.8 Click “OK” 4.9 Click “Apply” or “Confirm” to complete the configuration. Now you can start printing. (Note: If your printer model is for HP 1020) Specification: Material: ABS USB Port: 1 USB2.0 High Speed Interface Internet Port: 10/100Mbps Adaptive Power Supply: USB 5V 0.5A Internet Environment: Support Wired, Wireless Routers, Switches Power Consumption: 5W Automatic Queue Printing: Support Printing Protocol: TCP/IP RAW Crossing Internet Segment: Not Supported Support Function: Support Print Sharing Fax/scan Shared Printer Types Are Not Supported: Lottomr, Inkjet, Thermal, Etc. USB and Internet Printers Package List: 1 x Wireless USB Print Server 1 x USB Power Cable 1 x Plug