Step 1: Clean the surface area. For best results, make sure: - To clean the area with a wet wipe, use the dry wipe afterward.
- That the installation spot is flat & smooth.
- To avoid leather and textured surfaces.
|
Step 2: Install the mount. Remove the adhesive cover underneath, then: - During installation, apply pressure for 30 seconds.
- Wait at least 4 hours before using, for the adhesive to have maximum hold.
|
Step 3: Install the metal plate. Remove the plate adhesive cover, and: - Install the plate on your phone or the case.
- If you have a thin case, the plate can be installed inside. (Thick case wont work)
- For wireless charging users, install it horizontally to the bottom.
|