Feature

●The ABITAN: We are a Professional manufacture and supplier of light source for projection and stage, with more than 10 years experience;
●QUALITY CONTROL: All Projector lamps will be Tested Strictly before leaving the factory, And they Show Stable Light Output about 3200 Lumins Over 3000-4000h life;
●COMPATIBLE MODULES:for EH-TW6700 TW6600W TW6600 TW6800 3000 3100 3500 3600e 3700 3900
●EASY INSTALLATION: It is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well;
●WARRANTY: Include with every projector lamp we sell is our trusted 200-Day Guarantee. If you order a projector lamp from our company and you ara not satisfied for any reason, you may send the projector lamp back for a full refund or an replacement


Description

ShowsShows

ABTIAN Projector Lamp

Outputting high definition pictures and great brightness.

ABITAN Replacement LampABITAN Replacement Lamp

ABITANABITAN

We are a Professional manufacture and supplier of light source for projection and stage, with more than 10 years experience;

Model：for ELPLP85 / V13H010L85 Lamp with Housing

  • All Projector lamps will be Tested Strictly before leaving the factory, And they Show Stable Light Output about 3200 Lumins Over 3000-4000h life;
  • It is quite easy to install it into your projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well;

  • Output: 3200 Lumins
  • period: 200 days
  • Power:250w
  • Working hours: 3000-4000 hours
ELP-LP85ELP-LP85

Compatible Models:(Ctrl+F to find your model)

For EH-TW6700 TW6600W TW6600 TW6800 3000 3100 3500 3600e 3700 3900

ABITAN Technology

wickwick

wick testwick test

screwdriverscrewdriver

ProjectorProjector

Professional production workshop

We have a modern factory, all wick parts are inspected by machines, and professional engineers will supervise each production step;

Rigorous testing

All Projector lamps will be Tested Strictly before leaving the factory;

Installation guide

  1. Turn off the projector and unplug the power cord, allow the projector lamp to cool down for at least one hour;
  2. Use the screwdriver to loosen the screw securing the lamp cover, then lift it off;
  3. Loosen the screws securing the lamp to the projector. The screws do not come all the way out;
  4. Lift up the lamp handle and gently pull the lamp out of the projector;
  5. Gently insert the new lamp into the projector.make sure it is facing the right way. Press the handle down;
  6. Push in the lamp firmly and tighten the screws to secure it, then replace the lamp cover and tighten the screw to secure it.

Maintenance tips

  • Check the heat. An overheated projector puts stress on the projector lamp and can cause it to explode. Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.

  • Give it a rest. Don’t operate the projector non-stop. An average use of four to five hours per day will ensure longer projector lamp life.

  • Keep it clean. Be sure to clean the air filters every 3 months or more often if there is a lot of dust. Regular maintenance will prolong the DLP projector lamp life.

  • Go eco. Some projectors have the “Eco mode” or “Lamp Economy Mode” that reduces projector lamp brightness by 20% while extending the lamp life by 50%.