Feature(may vary by option.)

●SUCTION CUP SHOWER HEAD HOLDER:The shower wand holder uses adhesive silicone suction cup with diameter of 3.3inches for vacuum adsorption,which can bear maximum weight around 11lbs. The slot will allow you to adjust the shower holder up to 30° as well.
●ADJUSTABLE SHOWER HOLDER WITH SLIDE BAR:The slide block on it is adjustable and you can slide it UP AND DOWN or left and right,which allows you to place the shower arm at any desired height for easy to access without relocating it many times.
●INSTALL AND REMOVE IN 10 SECONDS:No tools and no drills,you only need to put the suction cup on the contact surface and then push the button all the way down,the self-priming shower hose holder will work.If you have to remove it,please pull the button back then the tip of the suction cup back.
●FITS UNIVERSAL SHOWERHEADS:The slot diameter is 0.87" fits most standard handheld shower heads and shower hose nuts, but please MEASURE your shower hose nuts diameter before you order.
●MATERIAL AND WIDE SCOPE OF APPLICATION:ABS plastic material with shiny chrome finish.Light weight but heavy duty.Suitable for smooth surface such as ceramic tile,marble,smooth wood,smooth metal surface,etc. Make sure the contact surface is clean before use.

[Replacement Hose]

[Classic]

[Shower Head Holder+Hose]

Description

Found that the shower head doesnt fit the holder?

Please check the newer model with SHOWER HOSE. It fits well with our shower head holder, and it fits most shower heads on sale. If you already have the holder, you can search the shower hose with code: B0CF51DMCR

Product doesnt stick on the wall?

Its a Vacuum Suction Shower Head Holder. Remember to press down the black toggle and create the strong suction power, and the holder can hold up to 11 lbs.

Humanized design for all family members

Height & Angle Adjustable Shower Head Holder

Adjusting height and angle to meet the need of you and your family *The shower head is not included! For display only
Super suction to stay put on the SMOOTH WALL

Height&Angle Adjustable

The slider can be adjusted up & down to accommodate different heights, and you can adjust the angle to 30° for a better showering experience.

The Inner Diameter of Holder

The inner diameter of the holder is divided into two different diameters - top and bottom, for a tighter connection. Top: 0.85", Bottom: 0.79"

Cover More Shower Area

Toggling the slider to the left & right to cover a wider area of shower, increasing the power of the water to clean every corner of the bathroom.

More Suction Power

Press down the BLACK TOGGLE, and the suction cup will create strong suction power to stay put on walls. Please note install it on the smooth surface.

Thoughtful design for family members

Height Adjustable Shower Head Holder

This shower head holder is different from traditional shower holder, adjust the height and the angle of the water outlet to suit every member of your family. A convenient solution for junior and elder to have a better showering experience. (We also think of people differently abled, and it provide more convenient for them).
This shower head holder helps you to free your hands to take a bath for your pets.
The adjustable height is 9.8“/25cm

Install and remove in 5 minutes

Installation and Remove Guide of Shower Head Holder

Clean the wall with a wet towel beforehand.
Place the suction cup against the wall, remembering that the black toggle should be on the right side.
Push the toggle down and make sure the mount is tightly installed, wait 30 minutes before use.

How to remove: Unlock the black toggle and pinch the plastic paddle of the suction cup to easily remove the holder.