Feature

●Includes stainless hardware
●Easy to Install:Two-piece split design winch stopper with 1 allen wrench for easy installation and removal.No need to add extra washers,more convenient.
●Wide Application: Fit for ATV,UTV,Truck,ORV,Trailer,Sport-Utility and Off-Road vehicles etc.Work with steel roller or aluminum hawse fairleads,all steel cable wires or synthetic ropes up to 1/2" in diameter (12mm).
●Excellent Function:Keeps tension on the hook to prevent the cable becoming loose.Eliminates wear and tear on your rollers from the hook.Eliminates hook/fairlead rattle and chatter while sliding.Protects the winch motor and gears from pulling the cable in to far and bottoming out on the rollers.
●Durable Winch Accessory:This cable protector is made of high-quality rubber,anti-fading,anti-cracking,tear and wear resistance.The metal screws and nuts are covered by zinc to prevent oxidation,corrosion and rust.Meet your long time using.


Description

SAFETY & INSTRUCTIONS FOR WINCH STOPPER:

1.For your protection: Please wear leather gloves when installing

2.Free spool winch, and pull out approx. 2 feet of cable.

3.Pull hairpin and release clevis pin from the winch hook.

4.Remove the four bolts that fasten the two halves of the Split Hook Cable Stopper together.

5.Place the cable or rope between the two halves, insert the four bolts, then tighten.

6.Re-attach hook to cable end.

7.To stow the hook, grip clutch, and retract cable on winch spool until hook is snug against hook stopper and fairlead.

8.Position the hook stopper at approx. 3/4 of the total line distance towards hook, while using your winch.