Feature
●You Will Get: The concrete hole saw kit provides five diameter hole pitches (30mm/1-3/16 inch, 40mm/1-9/16 inch, 60mm/2-3/8 inch), three 4.3-inch pilot drills and 7.95-inch long SDS PLUS, They are a good helper for your drilling operations
●High Quality: Our masonry hole saw kit is made of high-quality YG8C alloy. It can help you quickly drill clean holes and can be used for many years even under severe conditions
●Wide Range Of Applications: Our cement hole saw can easily drill through the most common wall materials, such as stone, cement, brick, adobe, etc. It is an ideal tool for opening holes when you install air conditioners, water pipes, water heaters, and fume pipes
●Wide Compatibility: Our sds hole saw is suitable for any electric hammer drill that accepts SDS-max tool holders, making your hammer drill more useful than before
●100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience.
[30mm 40mm 60mm Combination]
[30mm 40mm 65mm 80mm 100mm Combination]
[65mm 50mm 30mm Combination]
Description
Please look for the Luomorgo brand. We take every customer seriously and provide our customers with the most cost-effective products responsibly!
Our concrete hole saw are made of high-quality alloys, sturdy and durable, and can be used with SDS Plus tools. They are very suitable for making holes in cement brick walls, red brick walls, adobe walls, mixed drill walls, and foam drill walls.
Easily Remove Chips
When you work, the outer groove and inner groove of the drill bit can help you clean and easily remove chips, allowing you to continue to work efficiently and ensure your continuous drilling experience.
Easy to Use
SDS plus shank is used in conjunction with a round shank four-hole electric percussion drill. The holes are sharp by cutting teeth, the holes are precise and fast, and easy to control.
Package Included:
1 x 1-2/11" hole saw cutter
1 x 1-9/16" hole saw cutter
1 x 2.36" hole saw cutter
1 x 7.95" long connecting rod
3 x 0.28" shank drill bit
1 x screw
About Installation
1. Insert the center drill into the connecting rod hole and align the slotted surface with the screw hole
2. After the center drill groove surface is aligned with the screw hole, install the fastening screw and tighten it
3. It can be used after tightening the hole opener head and connecting rod
Notice
1. Neither a single post or a single hole opener can complete the drilling, please be sure to purchase it as a complete set.
2. According to the thickness of the wall, choose the corresponding length of the post, then you can punch through the wall hole.
Customer Service:
If you are not satisfied with Luomorgos products, please contact us immediately, we attach great importance to your feelings and experiences.