Feature

●Compatible With：Puller head DL1 / DL2 / DL3 / DL4 / DL5 / DL6
●Suitable bearing：6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310
●Function：A bearing puller is a tool which is used to remove components such as bearings, gears and pulleys from a shaft or a recess. The puller securely grips the component with specially designed jaws before driving it off the shaft. Pullers are used in every industry for safely and effectively dismounting bearings.
●Feature：Made of high-quality forged chrome vanadium steel，high hardness and high torque，can quickly change the puller head，suitable for a variety of bearings.
●How to use：1.Place bearing pullers；2.Adjust the bearing puller legs；3.Position the forcing screw；4.Apply pressure to the forcing screw；5.Remove part.


Description

11
11
Note:

1.We provide clear pictures measurements where possible. Please check as much as possible to make sure the item is the one that you need.

2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)

3.There are no instructions included in this kit. Professional Installation Is Highly Recommended！

4.Please check your machine in the list Before Purchasing!

Compatible With:

Puller head DL1 / DL2 / DL3 / DL4 / DL5 / DL6

Suitable bearing：

6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310

11

22

33

Follow the below steps to use a bearing puller:

Step One Place bearing pullers: Depending on the type of part being removed, either place the puller around the part or place it internally.
Step Two Adjust the bearing puller legs: Puller legs should fit tightly around or inside the part to be removed.
Step Three Position the forcing screw: Manually turn the forcing screw clockwise until the screw touches the shaft. Ensure that the center of the screw is in the center of the shaft when adjusting the legs.
Step Four Apply pressure to the forcing screw: Use a spanner or a socket wrench to turn the forcing screw slowly and carefully, or use hydraulic or pneumatic power to apply force.
Step Five Remove part: Turning the forcing screw results in the part being pulled off the shaft.
11

Product information