Frequently Asked Questions:
FAQ1: What is the best angle to clean the Record?
ANSWER: The correct position is holding the brush at a 90 degree angle to the record, if using it on a turntable you should apply subtle pressure to the Vinyl and move from the center to the outer edge once or twice making sure the dust particles get picked up.
FAQ2: Is it better to clean the record using a turntable?
ANSWER: It is easier to work the Record when placed on a turntable and makes the cleaning much simpler as the Record turns; applying light pressure will help getting the job done.
FAQ3: When should I use the cleaning solution?
ANSWER: The cleaning solution included with the brush is a great aide when the Record to be cleaned is especially dirty; a couple of passes and it will radically improve its performance. If there is not much dust present, you can use it dry with great results.
FAQ4: How do I use the Stylus brush?
ANSWER: The stylus brush should be used with care, always clean the stylus from back to front, pulling the brush along the stylus in the same direction the record travels, this action will clear debris and dust accumulation and help with the performance of the stylus.
FAQ5: How do I clean the Velvet Brush when too dirty?
ANSWER: When much dirt accumulation is present on the Velvet Brush, the performance and cleaning capabilities might get compromised. Please soak the brush on a warm soapy solution (you can use a soft hand cleaning soap or baby shampoo diluted 1/20 in water), then dry it using a microfiber towel to get it back to top performance.