[On sensitive surfaces.]

[Pack of 3 on sensitive surfaces.]

Tesa ceiling hook for wallpaper and plaster - hang mobile without drilling. The self-adhesive ceiling hook from tesa is a clever alternative to screws or eyelet screws. Instead of drilling or hammering, stick the hook quickly and easily to the ceiling. Thanks to the proven tesa Powerstrips technology, the hook has a holding capacity of up to 0.5 kg. They do not cause damage to the surface, can be removed at any time without leaving a trace and even reused with a new Powerstrip. The white ceiling hook is ideal for safely hanging mobiles and other decorative objects on wallpaper and plaster. Its hanging loop is rotatable. Easy on: clean the surface with a dry, dust-free cloth. Press the strip fully and as evenly as possible and firmly as possible for at least 5 seconds. The blue side of the handle must point to the wall. Loosen the transparent base plate from the ceiling hook and press it for at least 5 seconds on the adhesive strip. Now place the hook on the plate and slide it sideways until it clicks into place. Notes: Apply the adhesive strip to the surface first. Do not touch the adhesive surface. The adhesive hook is not suitable for surfaces with non-stick coating, e.g. when stain-resistant paint has been used. Easy off: loosen the ceiling hook from the base plate by sliding it sideways. Hold the base plate firmly without pressing it against the ceiling. Grab the strip on the handle and pull it parallel to the ceiling slowly for approx. 25 cm from (not down or side). Note: Not parallel or too fast peeling could cause the adhesive strip to tear or damage to the surface. Contents per multi-pack: 3 x adhesive hooks for the ceiling including 9 power strips