Feature(may vary by option.)
●Diameter 7/8"(22mm); Diamond height 10mm
●Each Tile Hole Saw with a Removable Diamond Tipped Drill Bit. No Special Guiding Tools Needed
●The glass hole cutter is made of high quality iron alloy, which is very sturdy and durable. At the same time, the surface is nickel plated, which has good rust resistance, corrosion resistance and prolonged service life
●The high quality diamond drill bits with thicker diamond coating make the edge of the groove sharper, which can achieve smooth and high precision cutting. Large chip holes on the side can remove waste, ensuring smooth and accurate punching
●The operation is simple, without the need for other special guide tools. Use the tile hole saw installed with the positioning drill bit to position the hole, remove the positioning drill bit after positioning, and then directly cutting the hole with the tile hole saw. Note: During the cutting process, remember to add water or coolant to extend the life of the diamond hole saw.
[2 (50mm)]
[6 (150mm)]
Description
Glass Tile Hole Saw With a Pilot Pin, NO NEED ANY GUIDES
Good performance: Diamond dust coating offers superior performance and cutting strength.
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication.
Features:
Good performance: Diamond dust coating offers superior performance and cutting strength.
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication.
Specification：
Total Lenght: 70mm ( 2.75 inch)
Drill Depth: 40mm（(1.57 inch)
Hex Shank Diameter: 18mm ( 0.7 inch)
Warm Tips: Please add water as coolant and drill slowly.