Feature●High-frequency oscillation, micrometer aperture, large atomization amount, fine mist particles, high spray rate●The atomizing piece needs to be used together with the circuit board with the same frequency to achieve the ideal spray amount●The left and right welding points of the switch can be welded together to realize power on, i.e. spray, without the need to control the switch●There are two wires, the red wire is positive and the black wire is negative. The wire is 80mm long and there are terminal blocks at the end of the wire●There is waterproof adhesive on the welding points of the wires to prevent circuit breakers, and a silver oxide layer on the surface of the atomizing sheet to protect the coating from oxidationDescription Product parameters
PCB board size: 35mm*19mm/1.38*0.75inch
Voltage: 5V
Current: 300mA
Frequency: 110KHz
Power: 2W
Aperture: 5um
Holes: 740
Wire length: 80mm/3.15inch
Atomized steel sheet diameter: 16mm/0.63inch
Rubber ring diameter: 20mm/0.79inch
Rubber ring thickness: 4mm/0.16inch
Atomizer material: shockproof silicone ring, piezoelectric ceramic ring, stainless steel sheet
Pay attention to the front and back sides during installation
The white piezoelectric ceramic ring surface is the front spray surface, which is installed upward
All steel sheet surface is the suction surface on the back, installed downwards