Feature(may vary by option.)

●Effortless with the help of the double level structure. you can operation and press the gromment tool kit by only one hand. Suitable for indoor or outdoor set-up, repair, and decorating works, etc.
●Magnetic dies fix the eyelet and washer accurately without the possibility of falling out, applied with durable high purity metal for a longer life span. This manual eyelet puncher matches up 3/8"(10mm) inner diameter eyelets with 300pcs gold eyelets included.
●No pilot hole is required. Punching at the same time, the guard ring is installed. The handle is ergonomic and material is made of special plastic, which is wear-resistant, non-slip and easy to hold.
●If the top and bottom dies of the press did not line up properly, align them by adjusting the screws.
●It can be used for PVC banners, tarpaulin, garments, bag, cardboard, tents, canvas, awning, curtains and case, etc. Do not work on fabric or towels and other very thin materials. If the material you put the gromment tool in is too thin, you can get double thickness on the thin material cover vinyl. Otherwise there is a risk of tearing and ripping.

[Gold]




[Silver]





Description

Grommet Tool KitGrommet Tool Kit

About Grommet Tool Kit

  • The new double lever design makes it easier to work than other tools, and girls can use it easily.
  • Applied with durable wear-resisitent High-purity steel metal and of a long lifespan.
  • Cast iron construction and special anti-wear and anti-slip rubber material, durable, comfortable to the touch, easy to hold and finger safety.
  • Punching and grommet setting is performed at the same time, without the need for extra tools or steps to pre-punch.
  • The tool has built-in magnets to hold holes and gaskets in place.

Using the step

Using the stepUsing the step

Using the stepUsing the step

Using the stepUsing the step

Using the stepUsing the step

Step 1

Connect the washer to the upper die.

Step 2

Place the washer in the lower slot.

Step 3

Place the material between the upper and lower molds.

Step 4

Press the handle and release it.

APPLICABLE FOR APPLICABLE FOR

APPLICABLE FOR

It can be used for PVC banners, tarpaulin, garments, bag, cardboard, tents, canvas, awning, curtains and case.Nomally no need to Pre-punch. If the material is too hard to punch,it can be pre-punch to try.

Do not useDo not use

NOT APPLICABLE FOR

Do not apply to fabric or towels and other very thin materials. If the material you put the gromment tool in is too thin, you can get double thickness on the thin material cover vinyl. Otherwise there is a risk of tearing and ripping.If used on fabric, pre-punching is recommended.