1. The drainage pump is mainly used to remove contaminated condensate, and is used in air conditioning systems and refrigeration equipment.
2. The air conditioner drainage pump has a flow rate of 24m³/h and a maximum lift of 12 meters, can run with low noise and is safe and stable.
3. Circuit board sealing treatment, not affected by humid environment, better heat dissipation effect.
4. Electrode type water level sensor solves the failure problems of traditional float water level sensor such as water absorption and jamming.
5. The drainage pump has complete accessories, easy to assemble, and wall‑mounted installation can save space.

Spec:
Item Type: Air Conditioning Pump
Model: M1
Material: Engineering Plastic
Purpose: Air conditioning pump
Voltage: 110-240V 50-60HZ
Maximum Recommended Head: Approx. 12meters / 39.4ft
Flow Rate: 24m³/h
Pumping Capacity: 24L/h
Working Steam Consumption: 24L/H
Suction Pressure: 2kpa
Working Steam Pressure: 2mpa
Applicable Maximum Cooling Capacity: 30000btu/h (within 3 horses)
Water Storage Tank Capacity: 200ml
Noise at 1 Meter: 19dB(A)
Drive Mode: Electric
Performance: Automatic
Delivery Medium: Clean water pump
Installation Method: Wall-mounted
Operating Temperature: 0-50℃

How to Use:
1. Cut off the power.2. Please fix the mounting bracket provided with the device to the appropriate position on the wall, and adjust the mounting plate through the mini‑horizontal column during the installation process to make the upper end surface level.3. Insert the drain pipe of the air conditioner into the water inlet of the drain pump. The outlet of the drain pump can be connected with a 6mm x 9mm (inner diameter x outer diameter) water pipe and fixed with the self‑locking strap in the accessory bag. Arrange the water pipe of the water outlet, and hang the drain pump on the mounting bracket on the wall.4. Check whether all water