[6-Pin]

[2-Pin]

[4-Pin]

[3-Pin]

Overview:
Mini-Fit Jr. and Mini-Fit Plus Power Connectors deliver up to 9.0A and 13.0A respectively, while blind-mating and terminal position assurance options offer a versatile connector system for a wide range of applications

Item Specification: Receptacle and Plug Housing Mini Fit JR
Mini-Fit Jr. Receptacle and Plug Housing, Dual Row
Approval: UL 94 V-2,
Material Polyamide
Rated: 13 Amps
Pitch - Mating Interface .0165" (4.20mm)
Pitch - Termination Interface .0165" (4.20mm)
Temperature Range - Operating: -40°C to +105°C

Item Specification: Terminals Mini Fit JR
Crimp or Compression Style Terminals
Made out of Brass Metal Material
Tin Plating Mating
9.0A Current - Maximum per Contact
600V Voltage - Maximum
Wire Insulation Diameter1.30 - 3.10mm
Wire Size accepted (AWG)18-24

Glow Wire referenced Molex product is manufactured from material that has the following ratings, tested by independent agencies:
a) A Glow Wire Ignition Temperature (GWIT) of at least 775 deg C per IEC 60695-2- 13.
b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.
This complies with the requirements set out in the International Standard IEC 60335-1 5th edition - household and similar electrical appliances - safety, section 30 Resistance to heat and fire.
The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow- wire flammability test standard IEC 60695-2-11 and any applicable product end-use standard(s).
If it is determined during the customer’s evaluation of suitability that the performance does not match customer needs, please contact Molex.