Feature

●【Unique】100% New , Trackpad + Cable included.
●【Compatibility】Replacement for MacBook Pro 13" Unibody A1278 (Mid 2009, Mid 2010, Early 2011, Late 2011, Mid 2012) , (Not fit 2008 year or Not fit for Macbook Air series)
●【Compatibility List】Compatible with MacBook Pro 13" Unibody A1278 (Mid 2009 - Mid 2012): For MacBookPro5,5 Mid 2009:(MB990LL/A,MB991LL/A), MacBookPro7,1 Mid 2010:(MC374LL/A, MC375LL/A), MacBookPro8,1 Early 2011:(MC700LL/A,MC724LL/A), MacBookPro8,1 Late 2011:(MD313LL/A,MD314LL/A), MacBookPro9,2 Mid 2012:(MD101LL/A,MD102LL/A)
●【Function】 Seamlessly works just like your old trackpad . Smooth easy scrolling , Three- and Four-finger swipe , Double tap Reliable, easy clicking
●【Identifying Numbers】PPN: 821-0831-A, 821-1254-A , APN:922-9063, 922-9525, 922-9773

Description

Trackpad with cable Replacement for MacBook Pro 13" Unibody A1278 (Mid 2009 to Mid 2012)

Seamlessly works just like a dream

Has your computer lost its magic touch? Bring it back with this new trackpad.

Smooth easy scrolling
Three- and Four-finger swipe
Double tap
Reliable, easy clicking
Note: Before installation,remember turn off the power.
It is important to make sure you connected well the keyboard/trackpad cable

Trackpad with Flex Cable Replacement for MacBook Pro 13" Unibody A1278 (Mid 2009 to Mid 2012)

Description

A worn out trackpad may have cosmetic scratches or a cracked surface causing it to malfunction. In addition, an aging trackpad may become unresponsive making your laptop difficult to control.

Replace a damaged trackpad for MacBook Pro 13" Unibody (Mid 2009 to Mid 2012) with model A1278 and restore the touch sensitivity of your laptop with this part.
Whats included: Trackpad (Silver, Glass, Multitouch) with Flex Cable
Identifying Numbers：PPN: 821-0831-A, 821-1254-A , APN: 922-9063, 922-9525, 922-9773
Our trackpads are individually tested and guaranteed to function perfectly.
There are different versions of trackpad for different years and models , please double check the compatibility list to make sure you are buying a compatible model.

Compatibility - Please double check your MacBooks model number "A1xxx" and "EMCxxxx" on the bottom of the laptop to determine the compatibility

Compatible with MacBook Pro 13" Unibody Mid 2009 A1278 (EMC 2326)

For MacBookPro5,5 Mid 2009: MB990LL/A (2.26 GHz Core 2 Duo) or MB991LL/A (2.53 GHz Core 2 Duo)

Compatible with MacBook Pro 13" Unibody Mid 2010 A1278 (EMC 2351)

For MacBookPro7,1 Mid 2010: MC374LL/A (2.4 GHz Core 2 Duo) or MC375LL/A (2.66 GHz Core 2 Duo)

Compatible with MacBook Pro 13" Unibody Early 2011 A1278 (EMC 2419)

For MacBookPro8,1 Early 2011: MC700LL/A (2.3 GHz Core i5) or MC724LL/A (2.7 GHz Core i7)

Compatible with MacBook Pro 13" Unibody Late 2011 A1278 (EMC 2555)

For MacBookPro8,1 Late 2011: MD313LL/A (2.4 GHz Core i5) or MD314LL/A (2.8 GHz Core i7)

Compatible with MacBook Pro 13" Unibody Mid 2012 A1278 (EMC 2554)

For MacBookPro9,2 Mid 2012: MD101LL/A (2.5 GHz Core i5) or MD102LL/A (2.9 GHz Core i7)

Tips


When installing new trackpad Routing the cable through the upper case and past the logic board may be difficult. It is helpful to use the tip of a spudger to guide the connector past the logic board while pushing the cable through its slot in the upper case with your other hand.	Reinstall the 4 screws Next, reinstall the four 1.2 mm Phillips screws along the inner edge of the trackpad. Tighten the screws all the way, then back them out about 1/4 turn.	Check the alignment Check the alignment of the trackpad on the keyboard side of the upper case. Once you have centered the trackpad in the upper case, tighten the four Phillips screws all the way.

Frequently Asked Questions

Trackpad not working? It can be difficult to diagnose the exact problem. Is it the cable? The trackpad itself? Something not aligned correctly? Any of these could be the issue.

Question 1.: Not possible to click ?

Answer : Try to reset the SMC in this way:

1. Attach the MagSafe power cord

2. Power off the MacBook Pro

3. Press the L-Shift/Control/Option and Power button at the same time and hold.

4. Release them all at the same time

5. Then power on the MacBook Pro

Question 2. : Click works fine but the trackpad doesnt detect fingers the way it used to ?

Answer : You probably need to slightly loosen the screw in that little triangle shaped groove by the bottom center of the trackpad. That will lessen restriction on the pressure sensors range of movement so that it can detect slight touches.

Question 3. : After installing the new trackpad ,couldnt click, as the clickable area of the trackpad wouldn’t move at all ?

Answer : To fix this,u should very slightly and gently pry the two small “pods” (on the long side opposite the connector) upwards (ie) towards the tactile surface.Once mounted again, it will work perfectly well.

Question 4. : The trackpad works intermittently or only in some areas, or will track but won’t click ?

Answer : Symptom of a swelling battery will be,it requires replacing the battery and will be no issues.

Note:

It is important to make sure you connected well the keyboard/trackpad cable
Test if your keyboard is working before attempting to reset either the PRAM/NVRAM and the System Management Controller (SMC), which, although not required, I would recommend doing after replacing a piece of hardware like the trackpad


	This item: Trackpad Replacement for MacBook Pro 13" (Mid 2009 -Mid 2012）	Trackpad Bracket Screw Replacement for MacBook Pro 13" Unibody (Mid 2009 - 2012)	CPU fan replacement for macbook pro unibody 13" (late 2008 -mid 2012)	Keyboard Replacement for MacBook Pro 13" Unibody (Mid 2009 - 2012)	Wifi Card Replacement for MacBook Pro Unibody (Early 2011-Mid 2012)	25 in 1 Electronics Repair Tool Kit

Customer Reviews	198	58	264	44	—	133
Price	$30.99	$5.99	$15.99	$18.99	$40.99	$8.99
Compatible with Macbook Pro 13" (Late 2008) Model A1278			✓
Compatible with Macbook Pro 13" (Mid 2009- 2012) Model A1278	✓	✓	✓	✓
Compatible with MacBook Pro Unibody (Early 2011-Mid 2012) 13" A1278, 15" A1286 or 17" A1297					✓