![A+3](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
INSTALLATION METHOD AND STEPS
1. Check that the product set is complete: driver module*1, remote control *1, light pods*8 (single side light blocks installed at the end), connecting wires *8(0.8M * 3PCS 1.0M/* 3PCS 1.2M * 2PCS), spare electronics *2, fuse *1, a bundle of tape.
2. Starting from the driver module, connect the light pods in sequence and use appropriate connecting wires according to the circumference of the motorcycle to connect the light blocks, which can improve the luminous effect.
3. It is recommended to set the installation position of the lamp pods first, wipe off the dust, and then tear off the 3M adhesive backing to stick it. (Dust may cause unstable adhesion)
4. Connect the black wire of the driver to the negative pole, the red wire to the positive pole, and the white wire to the brake wire. (If you are concerned about power consumption, you can connect the red wire to the fuse, so that when you remove the key, the kit will immediately stop working.)
5. During installation, please keep the driver and light pods away from heating components, such as exhaust pipes. High temperatures can easily damage the kit.
6. If you encounter any other problems, you can refer to the manual or message us for assistance.