Feature

●The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
●The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 10mm to 10mm/0.39inch to 0.39inch; Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
●Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
●Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
●Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.

[8mm to 10mm 1]




[10mm to 10mm 2]




[8mm to 10mm 2]




[10mm to 10mm 1]





Description

SHAFT COUPLERSHAFT COUPLER

Advantages:

1. Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time 2. Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity. 3.No rotation gap and elastic action can make up for symmetrical angular misalignment.

Application:

Shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane

SHAFT COUPLERSHAFT COUPLER