Feature

●Plug and Play 3157/3157K LED Load Resistors with 50W 8 Ohm high power Lights Error Free Canceller Capacitor Decoder Wire, Excellent for Heat Dissipation. (3157B-Type LED Load resistors, Fits to Most America-made Car).
●Working Power: 50W 6 ohm. One LED Load Resistor for One LED Bulb.
●Plug& Play LED Load Resistors Fits 3047, 3057, 3057A, 3155, 3157, 3157A, 3157NA, 3357, 3357A, 3454NA, 3457, 3457A, 3457NA, 3757A, 4057, 4114, 4157, 4157NA, 5702A, 5702AK for Turn Signal Bulb Or LED License Plate Lights to Avoid Hyper Flashing- No Flashing Or Burnt Out Bulb Indications.
●Used for Headlight Bulb, Fog Lamp, Turn Signal Light, Daytime Running Light etc. See The Product Socket Picture And Make A Confirmation.
●It is mainly used for refitting the LED. The halogen lamp of the original car has high power, but due to the low LED power, the original car’s computer driving system has a fault display, and the fault can be eliminated after installation.
●Load Resistors Heat Up Like Light Bulbs And Get Really HOT When Working. Mount Them On Metal Surface, NOT Plastic. So Dont Touch By Hand Directly. Amazon Filter System Might Not Be 100% Accurate, So Please Double Check Your Original Bulb Type Before Ordering. And The Bulbs Size Also Need To Be Confirmed. HUINENGYUAN Offers "ONE YEAR" Warranty On Items Damaged During Delivery Or Have A Confirmed Manufacturer Defect. Please Buy with Confidence!


Description

About this item:
This listing features one pair (2 pieces) 3157 LED 50W 6ohm load resistor for warning canceler anti turn signal hyper flash or blinker for your car truck trailer,LED switchback led bulbs, tail or parking lamp hyper flash

IMPORTANT NOTE:
WHEN MOUNTING THE RESISTORS TO THE VEHICLE DO NOT ATTACH THEM TO PLASTIC AND DO NOT USE ZIP TIES, BECAUSE THE RESISTORS WILL GET VERY HOT.
FEATURES:
--Cancel Error message cause by OBC (On-Board Computer) Check
--Fix Hyper Flashing on Turning Signal light.
--Cancel hype blink on LED.
--Reduce the Power on LED light so they can work better
--Not cutting or splicing! Just plug & play: simply twist your LED bulb onto the base, and twist the other end into your existing bulb socket.
Unlike complex installation of 50W 6-Ohm load resistors.
--Compatible for 95% vehicle with CAN-BUS systems including European and domestic vehicles.
--Built-in LED decoder and resistor.

INSTALLATION:
Professional installation is highly recommended (No instruction included)
IMPORTANT NOTE:
If you are not sure your socket type CK or standard, please use the keyword (CK or Standard Test) on YouTube ,the video will show you how to test the socket.( please check before you place the order , Our decoder come with Standard Base, NOT CK Type, put standard bulbs into CK type sockets, the bulb will look dim and may pop the fuse or burnt out in couple days