This relay wiring kit solve computer error warning encountered during the installation. It also help the following problems: One light out in cold weather and where trouble is experienced with Auto-on systems. Eliminate LED Bulb Flickering cause by vehicles computer not recognizing low wattage LED Light. Fix random shut-offs, and works for many DRL (Daytime running light) systems.
Note:
- This is a 3 Locking Tabs Connector, Please Confirm That your Factory Connector is 3 Locking Tabs.
- The LED bulbs have lower power consumption; European brand name of cars may need to tap on Load Resistors to remove the error code on dashboard For CAN-BUS Bulbs
- When using LED bulbs for turn signal, you will need to use the above load resistor or decoder set to prevent hyper flash or bulb malfunction.
- If the LED does not light up, simply flip it 180 degrees (reverse the polarity)
Voltages: 12V;
Wattage: 50W;
Input Voltage: DC 12V;
Mirror Lighting Type: Turn Signal Indicator;
Cross reference: 3157 3357 3457AK, 3357ALL, 4114K, 3157X, 3057KLCP, 3757AK
One Pair load resistors for 3157 4157 Switchback led bulbs with wire adapters
Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.
|
|
|
---|---|---|
|
|
|