[1-1  & 2 Dia x 1  & 2 x 1  & 4   Shank]

[2-11  & 16 Dia x 1-3  & 16 x 1  & 2   Shank]

[1-5  & 8 Dia x 5  & 8 x 1  & 4   Shank]

[1-3  & 4 Dia x 7  & 8 x 1  & 2   Shank]

Product Description

The lock Miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the Cutter. The second is braced vertically against the fence and fed across the Cutter. For best results use in a table-mounted router, #55390, diameter (D): 2-11/16, angle (a°): 45°, cutting Height (B): 1-3/16, Shank (D): 1/2, overall length (L): 2-5/8, max RPM: 18, 000, material Size: 1/2-1-1/8, flutes: 2, D1: 9.2mm, 55390 carbide Tipped Lock Miter 45 deg X 2-11/16 dia x 1-3/16 x 1/2 inch Shank for 1/2 - 7/8 material

From the Manufacturer

Since 1972, Amana Tool has been producing router bits and has become the global leader in its field. In fact, the company was the first manufacturer to produce router bits according to the Holz BG German standard for safety and quality. This standard contains rules that determine the structure and quality of the tools material in order to create the safest environment for the user. From its beginning, Amana Tool has always used the highest quality materials, and its tools are produced using unique technologies, a majority of which were developed and built by the companys engineers following decades of testing and experience. For example, Amana Tool uses carbon alloy steel for its router bits that contains vanadium particles. This improves the structural integrity of the steel and prevents corrosion and defects in the internal structure of the material that can lead to cracks and breaks. High-tech machinery processes the carbon alloy steel to manufacture the router bodies in a single clamping. This yields router bits with superior balance, centricity, precision and symmetry. The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part is laid flat on the tabletop and fed across the cutter. The second is braced vertically against the fence and fed across the cutter. For best results use in a table-mounted router.