Feature(may vary by option.)
●Product 1: Coated in patented SIMpull Cable Jacket for easier pulling, stripping, and installation
●Product 1: Primarily used in residential wiring as branch circuits for outlets, switches, and other loads
●Product 1: UL Listed type NM-B
●Product 1: 8 gauge, 3 conductors with ground, 25 per coil
●Product 2: Double pole, 40 Amp, 240V type QP Circuit Breaker
●Product 2: 10,000 AIC interrupting rating
●Product 2: Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
●Product 2: Compatible with Siemens PL and ES series load centers
[Southwire + Breaker Q240]
[Southwire + Southwire 63948421]
[Southwire]
[Southwire+ Circuit Breaker | Q250]
Description
Southwire 63949221 25 8/3 with ground Romex brand SIMpull residential indoor electrical wire type NM-B, Black
For general wiring of homes, stores, and shops. Southwire Romex Brand SIMpull NM-B (non-metallic sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the 2011 National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
SIEMENS Q240 40-Amp Double Pole Type QP Circuit Breaker black
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your homes electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your homes wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. the use of Siemens breakers is required. Siemens strongly recommends against the use of "used" breakers. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the **on a Siemens panel is not voided, the use of Siemens breakers is required.