Feature

●【NGFF to SATA3.0】Boost the speed of M.2 SSD in any 2.5" SATA application with the M.2 SSD to SATA adapter and greatly improve system performance.
●【Faster Transmission Performance】 External SATA3.0 transmission interface, the theoretical transmission rate can reach the full speed of 6Gbps (SATA protocol). (The transfer rate is affected by the device configuration and SSD performance, and deviations from the theoretical data are normal.)
●【Applicable SSD Type】Can be matched with 2TB M.2 B-key large capacity SSD, which supports size specifications: 2230, 2242, 2260, 2280
●【Support System】WinXP/Win7/Win8/10/11 32bit/64bit/LINUX/MacOS
●【Tips for Use】Only M.2 NGFF SATA SSD is supported, NVME and PCI-E SSD are not supported; 2 SSDs must be connected for simultaneous use; the SSD will reinitialize at the first use, please backup the hard drive data before use; When used, 2 hard drives form a JBOD.

[BLACK-SATA 22PIN to Dual M.2 B-Key]

[BLACK-CFAST to SATA 22PIN]

[BLACK-M.2 to SATA 22PIN]

Description

Precautions for using the product

1. Be sure to back up the data on the hard disk before use. Because reorganizing the JBOD will erase all data on the hard drive.
2. To use, 2 M.2 SATA SSDs must be inserted into the riser card at the same time. SSDs that do not support PCI-E and NVME protocols. (Please read the product manual carefully for the installation method)
3. The highest speed of the adapter card under SATA3.0 is 500-550m/s. When connected to SATA2.0, the speed can only run at 200-260m/s.
4. The riser card is designed to combine 2 hard drives into a JBOD and merge them into one hard drive. This increases the hard disk capacity.
5. If the CD-ROM cannot be read without the driver, please contact us.

Packing Accessories

SATA to Dual M.2 Riser Card X1
CD X1
SATA Cable X1
User Manual X1
Screw X3