[Silver]
[Black]
L70 is a high-performance desktop headphone amplifier that supports XLR, RCA, TRS input.
High output voltage, high output current, low noise, low output impedance, it is compatible with almost all kinds of headphones.
1. L70 x 1
2. Remote control x 1
3. AC cable x 1
4. 6.35mm to 3.5mm adaptor x 1
5. User manual x 1; 6. Quality card x 1
Adopts the same NFCA module with A90, it provides a high performance to driving kinds of headphones.
The L70 can maintain ultra-low distortion output under high power load.
L70 provides Combo and RCA input port, and is available for XLR, TRS and RCA connection.
A safe volume can be set for the L70 to avoid sudden loud sound after power on/input switch
In preamp mode, you can get the 20ohm SE and 40ohm BAL output impedance to meet various power amp.
Ground loop noise may be encountered when multiple devices are used in combination. L70 has a GND/LIFT switch to solve this problem. When in normal use, set it to GND; and when ground loop noise is encountered, switch it to LIFT. Then the ground loop noise is terminated.
The L70 is equipped with a 12V Trigger in & out interface. With only one easy-to-obtain 3.5mm to 3.5mm cable, the L70 can be turned on and off synchronously with other devices equipped with a 12V Trigger interface.
L70 is compatible with common headphone jacks including: 4-pin XLR balanced, 4.4mm balanced, 6.35mm single-ended, and 3.5mm single-ended.
L70 can be adapted more personalized when connecting different earphones and other devices, wich greatly improves the convenience of use.
TOPPING L70 | TOPPING L30 II | TOPPING L50 | TOPPING A30Pro | TOPPING A90 Discrete | |
Customer Reviews
|
4.2 out of 5 stars
18
|
4.4 out of 5 stars
60
|
3.8 out of 5 stars
6
|
4.0 out of 5 stars
16
|
3.7 out of 5 stars
29
|
Price
| $349.00$349.00 | $149.00$149.00 | $169.00$169.00 | $249.00$249.00 | $599.00$599.00 |
Input
| SE+BAL | SE | SE | SE+BAL | SE+BAL |
Output
| 6.35mm, 4.4mm, 4 pin XLR | 6.35mm | 6.35mm, 4 pin XLR | 6.35mm, 4.4mm, 4 pin XLR | 6.35mm, 4.4mm, 4 pin XLR |
Pre amp
| ✔ | ✔ | ✘ | ✘ | ✔ |
Smart Impedance Outputs
| ✔ | ✘ | ✘ | ✘ | ✔ |
Bypass
| ✘ | ✘ | ✔ | ✔ | ✘ |
Gain
| SE: 0/13.8dB; BAL: 6/19.8dB | -14/0/16.5dB | -14/0/14dB | -14/0/14dB | SE: 0/9.5dB; BAL: 6/15.5dB |
SE power
| 3500mW x 2(16Ω) | 3500mW x 2(16Ω) | 3400mW x 2(16Ω) | 6000mW x 2(16Ω) | 3300mW x 2(16Ω) |
BAL power
| 6000mW x 2(16Ω) | — | — | — | 6000mW x 2(16Ω) |
SE Output inpedance
| <0.1Ω | <0.1Ω | <0.1Ω | <0.1Ω | <0.1Ω |